[SOLVED] Dodge C0077 Code: Fast Fix For Low Tire Pressure

The OBD code C0077 for Dodge indicates a fault in the Tire Pressure Monitoring System (TPMS).

Symptoms include the ABS and Engine warning lights being illuminated.

Common causes are incorrect tire pressure or a faulty tire pressure sensor.

This issue is not severe but should be addressed promptly.

A possible fix is to inspect the wiring harness, connectors, and sensor for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge c0077 OBD Code

The Dodge C0077 fault code typically triggers when there is an issue with the steering angle sensor.

Symptoms: AntiLock Brake System (ABS) Warning Light ON.
Engine Light ON (or Service Engine Soon Warning Light).
Possible symptoms include issues with the ABS system functionality.
Braking performance may be affected.
Unusual noises like grinding or clicking sounds during braking may be heard.

Causes of the Dodge c0077 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code C0077 include issues with the steering angle sensor or wiring faults.

C0077 can be caused by incorrect tire pressure.
A faulty tire pressure sensor.

Fixing Dodge Error Code c0077 Step By Step

To resolve Dodge fault code C0077, inspect and repair the steering angle sensor circuit as needed.

To fix the Dodge OBDII code C0077, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the ABS module.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, perform a diagnostic scan tool test to pinpoint the exact cause of the C0077 code.
Based on the scan results, replace the ABS module if necessary.
Finally, clear the fault codes and test drive the vehicle to ensure the issue has been resolved.

Cost Of Fixing Dodge c0077 Fault Code

The repair for Dodge fault code C0077 may involve replacing the steering angle sensor.

The cost to diagnose and fix Dodge OBD code C0077 is typically based on a 1. 0hour repair time.

Labor rates range from $75 to $150 per hour, so the cost can vary between $75 and $150, excluding parts.

Factors like shop rates and complexity can influence the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge c0077 OBD Code

Dodge fault code C0077 relates to a steering angle sensor circuit malfunction.

Dodge OBD code C0077 means a steering angle sensor circuit low.

This code is triggered by the steering angle sensor module when it detects a low voltage signal from the sensor.

The steering angle sensor is part of the vehicle’s stability control system and is responsible for measuring the steering wheel angle and rate of turn.

When the sensor detects a low voltage signal, it sets the C0077 fault code to indicate a circuit low condition.

Mechanic’s Tech Notes

For Dodge code C0077, check the steering angle sensor for calibration or wiring issues.

To diagnose and fix OBDII code C0077 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Additionally, visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection will help identify and address the root cause of the C0077 fault code.

FAQ

1. What does OBD code C0077 indicate in a Dodge vehicle?

OBD code C0077 in a Dodge indicates a fault with the Tire Pressure Monitoring System (TPMS). Check tire pressure, sensor, wiring, and connectors for issues.

2. What are the common symptoms associated with OBD code C0077 in a Dodge vehicle?

Common symptoms for OBD code C0077 in a Dodge vehicle include ABS warning light on, engine light on, caused by incorrect tire pressure or faulty tire pressure sensor.

3. How can I diagnose and repair OBD code C0077 in my Dodge vehicle?

Diagnose OBD code C0077 in Dodge: Symptoms ABS & Engine Light ON. Causes Incorrect Tire Pressure, Faulty Sensor. Fix Inspect wiring, connectors, and components for damage.

Wrap Up

If your Dodge is displaying OBD code c0077 and you’re experiencing issues with the ABS system, it could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor electrical connection at the sensor.

To address Dodge OBD code c0077, start by inspecting the wheel speed sensor and its wiring for any visible damage.

Test the sensor’s resistance and check for proper voltage supply.

Ensure connectors are clean and securely attached to the sensor.

Replace any faulty components as needed.