[SOLVED] Dodge C006A Code: Quick Fix For Dodge Multiaxis Sensor

The OBD code C006A for Dodge indicates an issue with the Multiaxis Acceleration Sensor in the AntiLock Brake System (ABS).

Symptoms include the ABS warning light and engine light being illuminated.

This is usually caused by a faulty sensor, wiring harness issues, or poor electrical connections.

It is a moderate issue that should be addressed promptly.

To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The Dodge fault code C006A indicates an issue with the steering angle sensor calibration.

  • Symptoms: AntiLock Brake System (ABS) Warning Light ON.
  • Engine Light ON (or Service Engine Soon Warning Light).
  • Possible loss of ABS functionality.
  • Brake pedal may feel different during braking.
  • Unusual noises from the ABS system.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge fault code C006A include faulty wheel speed sensor or damaged wiring.

  • C006A can be caused by a faulty Multiaxis Acceleration Sensor.
  • A Multiaxis Acceleration Sensor harness that is open or shorted.
  • A Multiaxis Acceleration Sensor circuit with poor electrical connection.

To resolve Dodge fault code C006A, inspect and repair the steering angle sensor circuit.

  • To fix the Dodge OBDII code c006a, start by reviewing the possible causes mentioned above.
  • Visually examine the wiring harness and connectors related to the ABS module.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If any issues are found, repair or replace the damaged wiring or connectors.
  • Clear the fault code using a diagnostic scanner.
  • Test drive the vehicle to see if the code returns.
  • If the code persists, consider resetting the ABS module or performing a software update.

The repair for Dodge fault code C006A may involve replacing the left rear wheel speed sensor.

The cost to diagnose and fix Dodge OBD code C006A typically ranges from $75 to $150, based on a 1. 0hour estimated repair time.

Factors like shop rates and complexity can affect the final cost.

Dodge fault code C006A relates to a steering angle sensor internal fault.

Dodge OBD code C006A indicates a problem with the Steering Angle Sensor Configuration.

This code is triggered by the Steering Angle Sensor (SAS) module when it detects an issue with the configuration or calibration of the sensor.

The SAS is a critical component of the vehicle’s stability control system, as it provides information about the steering wheel angle and rate of turn to the Electronic Stability Control (ESC) system.

When the SAS configuration is incorrect or not calibrated properly, it can lead to stability control issues and potentially unsafe driving conditions.

For Dodge code C006A, check for a faulty steering angle sensor or wiring issues.

To diagnose and fix OBDII code C006A in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the C006A fault code.

1. What does OBD code C006A indicate in a Dodge vehicle?

OBD code C006A in a Dodge indicates an issue with the Multiaxis Acceleration Sensor. Check sensor, harness, and connections for faults to resolve ABS and engine light warnings.

2. How can I diagnose the source of OBD code C006A in my Dodge?

Diagnose OBD code C006A in Dodge by checking for faulty Multiaxis Acceleration Sensor, harness issues, or poor connections. Inspect wiring and connectors for damage or corrosion.

3. What are the common symptoms associated with OBD code C006A in a Dodge, and how can I address them

Common symptoms for OBD code C006A in a Dodge include ABS warning light and engine light on. Address by checking and repairing faulty multiaxis acceleration sensor and related wiring.

Dodge c006a error fault code explained

If your Dodge is displaying OBD code c006a, you may experience issues with the steering angle sensor.

This could be caused by a faulty sensor, damaged wiring, or poor connections in the steering angle sensor circuit.

To address Dodge OBD code c006a, start by inspecting the steering angle sensor and its wiring harness for any visible damage.

Test the sensor’s output signal and ensure all connectors are securely attached.

Replace the sensor if necessary and repair any damaged wiring or connectors to resolve the issue.

Scroll to Top