[SOLVED] Dodge B2328 Code: Quick Fix For High Washer Fluid Sensor

The OBD code B2328 for Dodge indicates an issue with the washer fluid level sensor circuit.

This affects the Front Control Module (FCM).

Symptoms include the Engine Light being ON.

The cause could be a faulty sensor, wiring issues, or a problematic FCM.

It’s not a severe issue.

To fix it, inspect the sensor, wiring, and FCM for any faults or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge b2328 OBD Code

The Dodge B2328 fault code indicates an issue with the radio.

Symptoms: Service Engine Soon Warning Light ON.
Intermittent loss of power steering assist.
Steering wheel may feel heavy or difficult to turn.
Steering wheel may not return to center position after turning.
Steering wheel may vibrate or shake while driving.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Causes of the Dodge b2328 OBD Code

Possible triggers for Dodge fault code B2328 include issues with the HVAC blend door actuator.

B2328 can be caused by a faulty Washer Fluid Level Sensor.
An open or shorted Washer Fluid Level Sensor harness.
A poor electrical connection in the Washer Fluid Level Sensor circuit.
A faulty Front Control Module (FCM).

Fixing Dodge Error Code b2328 Step By Step

Repair involves inspecting and repairing the driver’s door lock switch circuit for Dodge B2328.

To fix the Dodge OBDII code B2328, start by reviewing the possible causes and visually examining the wiring harness and connectors related to the code.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the circuit for continuity and proper voltage.
Replace any faulty wiring or connectors as necessary.
Finally, clear the fault code and retest the system to ensure the issue has been resolved.

Cost Of Fixing Dodge b2328 Fault Code

The repair for Dodge fault code B2328 involves replacing the passenger door lock switch.

The cost to diagnose and fix Dodge OBD code B2328 is typically based on an estimated repair time of 1. 0 hour.

Labor rates range from $75 to $150 per hour, so the cost can vary between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.

Details of the Dodge b2328 OBD Code

Dodge fault code B2328 relates to the vehicle’s radio power circuit malfunction.

Dodge OBD code B2328 indicates a fault with the remote keyless entry receiver.

This code is triggered by the Body Control Module (BCM) when it detects a problem with the remote keyless entry receiver circuit.

The remote keyless entry receiver is responsible for receiving signals from the key fob to lock/unlock the doors and perform other functions related to the keyless entry system.

When this code is set, it typically points to an issue with the receiver itself, the wiring/connectors associated with it, or a communication problem within the keyless entry system.

Mechanic’s Tech Notes

For Dodge code B2328, check for a fault in the passenger door lock switch circuit.

To diagnose and fix OBDII code Dodge B2328, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough examination can help identify and address the root cause of the B2328 trouble code.

FAQ

1. What does OBD code B2328 indicate in a Dodge vehicle?

OBD code B2328 in a Dodge indicates an issue with the washer fluid level sensor circuit. Check sensor, wiring, and connectors for faults.

2. What are the common symptoms associated with code B2328 in a Dodge?

Code B2328 in a Dodge may cause the Engine Light to come on. Common symptoms include issues with the Washer Fluid Level Sensor or Front Control Module.

3. How can I diagnose and fix OBD code B2328 in my Dodge vehicle?

Diagnose OBD code B2328 in Dodge: Symptoms Engine Light ON. Causes Faulty Washer Fluid Level Sensor, harness issues. Fix Inspect wiring, connectors for damage or corrosion.

Wrap Up

If your Dodge is displaying OBD code b2328 and you’re experiencing issues with the driver’s door ajar indicator, it could be caused by a faulty door ajar switch, damaged wiring in the door harness, or a malfunctioning Body Control Module (BCM).

To address Dodge OBD code b2328, start by inspecting the door ajar switch for proper operation and wiring for any signs of damage.

Test the switch and wiring connections for continuity and repair or replace any faulty components as needed.