[SOLVED] Dodge B2299 Code: Quick Fix For Dodge Rear Camera Module

The OBD code B2299 for Dodge indicates a fault with the Rear Camera Module.

Symptoms include the Engine Light being ON.

This code is commonly caused by a faulty Rear Camera Module, open/shorted harness, or poor electrical connection.

It’s not a severe issue.

To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge b2299 OBD Code

The Dodge B2299 fault code typically triggers when there is an issue with the occupant classification system.

Symptoms: Service Engine Soon Warning Light may illuminate.
Issues with the Occupant Restraint Controller (ORC) system may be present.
This can lead to problems with the airbag system.

Causes of the Dodge b2299 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge B2299 include faulty occupant classification module or damaged wiring.

B2299 can be caused by a faulty Rear Camera Module.
A Rear Camera Module harness that is open or shorted.
A Rear Camera Module circuit with a poor electrical connection.

Fixing Dodge Error Code b2299 Step By Step

To resolve Dodge fault code B2299, inspect and repair the occupant classification module circuit.

To fix the Dodge OBDII code B2299, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the code.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the affected module for proper operation.
Reset or reprogram the module if necessary.
Consider replacing the module if the issue persists after reprogramming.

Cost Of Fixing Dodge b2299 Fault Code

Diagnosing and repairing Dodge fault code B2299 may involve replacing the occupant classification module.

The cost to diagnose and fix the Dodge OBD code B2299 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge b2299 OBD Code

Dodge fault code B2299 relates to a passengerside airbag module fault.

Dodge OBD code B2299 means a Restraint System Airbag Status.

It is triggered by the Occupant Restraint Controller (ORC) based on the status of the airbag system.

This code indicates a fault or issue with the airbag system, such as a problem with the airbag sensors, wiring, or the airbag itself.

When this code is set, it means there is a problem with the airbag system that needs to be diagnosed and repaired to ensure the proper functioning of the vehicle’s safety features.

Mechanic’s Tech Notes

For Dodge code B2299, check for a fault in the passengerside airbag circuit.

To diagnose and fix OBDII code B2299 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection will help identify and address any issues causing the B2299 fault code.

FAQ

1. What does OBD code B2299 indicate in a Dodge vehicle?

OBD code B2299 in a Dodge indicates an issue with the Rear Camera Module. Check for faults in the module, harness, or connections for repair.

2. What are the common symptoms associated with code B2299 in a Dodge?

Common symptoms for Dodge code B2299 include Engine Light ON, caused by issues like faulty Rear Camera Module or related wiring problems. Inspect and repair as needed.

3. How can I diagnose and repair OBD code B2299 in my Dodge vehicle?

Diagnose OBD code B2299 in Dodge: Symptoms Engine Light ON. Causes Faulty Rear Camera Module, harness issues. Fix Inspect wiring, connectors for damage or corrosion.

Wrap Up

If your Dodge is displaying OBD code b2299 and you’re experiencing issues with the occupant classification system, it could be caused by a faulty occupant classification module, damaged wiring harness, or poor connections at the module or sensors.

To address Dodge OBD code b2299, start by inspecting the wiring harness for any visible damage or corrosion.

Check the connectors for a secure fit and proper contact.

If no issues are found, consider replacing the occupant classification module to resolve the problem effectively.