[SOLVED] Dodge B2210 Code: Fix Dodge Occupant Restraint Controller Issue

The OBD code B2210 for Dodge indicates an issue with the Occupant Restraint Controller (ORC) system.

Symptoms include the Air Bag Warning Light being illuminated.

This is commonly caused by a faulty ORC, open/shorted ORC harness, or poor electrical connection.

While not a critical issue, it is important to address for safety.

To fix, inspect the ORC system components, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

Symptoms of the Dodge b2210 OBD Code

The Dodge B2210 fault code typically triggers when there is an issue with the occupant classification system.

Symptoms: Air Bag Warning Light ON

Causes of the Dodge b2210 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for Dodge B2210 include faulty occupant classification module or wiring issues.

B2210 can be caused by a faulty Occupant Restraint Controller (ORC).
An open or shorted Occupant Restraint Controller (ORC) harness.
A poor electrical connection in the Occupant Restraint Controller (ORC) circuit.

Fixing Dodge Error Code b2210 Step By Step

To resolve Dodge B2210, inspect and repair the occupant classification module and related wiring.

To fix the Dodge OBDII code B2210, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the code.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the circuit for continuity and proper voltage supply.
Consider resetting the module or performing a software update as necessary.
If the problem persists, replace the faulty component or module causing the B2210 code.

Cost Of Fixing Dodge b2210 Fault Code

The repair for Dodge fault code B2210 may involve replacing the occupant classification module.

The cost to diagnose and fix Dodge OBD code B2210 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Details of the Dodge b2210 OBD Code

Dodge fault code B2210 relates to the occupant classification system.

Dodge OBD code B2210 indicates a fault with the driver’s seatbelt switch circuit.

This code is triggered by the Occupant Restraint Controller (ORC) module when it detects an issue with the driver’s seatbelt switch circuit.

The ORC module monitors the seatbelt switch to ensure that the driver’s seatbelt is properly fastened.

If a fault is detected in the circuit, the B2210 code is set, indicating a problem that needs to be addressed to ensure proper operation of the seatbelt system.

Mechanic’s Tech Notes

For Dodge B2210, this section provides detailed information on the fault code and possible causes.

To diagnose and fix OBDII code Dodge B2210, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection will help identify and address any issues causing the B2210 fault code.

FAQ

1. What does Dodge OBD code B2210 indicate?

Dodge OBD code B2210 indicates an issue with the Occupant Restraint Controller (ORC). Check for wiring harness faults and connector issues to resolve.

2. How can I diagnose the source of a B2210 fault in my Dodge vehicle?

To diagnose a B2210 fault in a Dodge vehicle with Air Bag Warning Light ON, check for a faulty Occupant Restraint Controller (ORC), harness issues, or poor connections.

3. What are the common symptoms associated with a B2210 fault code in a Dodge vehicle?

Common symptoms of a B2210 fault code in a Dodge vehicle include the Air Bag Warning Light being ON. Causes may include a faulty Occupant Restraint Controller (ORC). Fix: Inspect wiring and connectors.

Wrap Up

If your Dodge is displaying OBD code B2210 and you’re experiencing issues with the driver’s door key cylinder switch, it could be caused by a faulty key cylinder switch, damaged wiring harness, or poor electrical connection.

To address Dodge OBD code B2210, start by inspecting the wiring harness for any visible damage or corrosion.

Test the key cylinder switch for proper operation and check the connectors for a secure fit.

Replace the key cylinder switch if necessary and ensure all electrical connections are clean and tight.