The OBD code B2112 for Dodge indicates an issue with the A/C Pressure Transducer circuit.
Symptoms include the Engine Light being ON.
This code is commonly caused by a faulty A/C Pressure Transducer or related wiring issues.
It is not a severe issue but can affect A/C operation.
To fix it, inspect the wiring harness and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Dodge b2112 OBD Code
The Dodge B2112 fault code indicates a potential issue with the airbag disable switch circuit.
- Symptoms: Service Engine Soon Warning Light ON.
- Loss of communication with the front control module.
- Possible nostart condition.
- Steering wheel controls may not work.
- Horn may not function.
Causes of the Dodge b2112 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Dodge B2112 include faulty ignition key, damaged key cylinder, or wiring issues.
- B2112 can be caused by a faulty A/C Pressure Transducer.
- A/C Pressure Transducer harness being open or shorted.
- A/C Pressure Transducer circuit having a poor electrical connection.
- A faulty Front Control Module (FCM).
Fixing Dodge Error Code b2112 Step By Step
To address Dodge fault code B2112, inspect and repair the driver’s door key cylinder switch circuit.
- To fix the Dodge OBDII code B2112, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the circuit for proper voltage and continuity.
- Replace the faulty component if necessary.
- Finally, clear the fault code and perform a test drive to ensure the issue has been resolved.
Cost Of Fixing Dodge b2112 Fault Code
The repair for Dodge fault code B2112 may involve replacing the occupant restraint controller module.
The cost to diagnose and fix the Dodge OBD code B2112 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge b2112 OBD Code
Dodge fault code B2112 relates to the passenger airbag deactivation indicator circuit.
Dodge OBD code B2112 means the Driver’s Seat Belt Retractor Pretensioner Circuit Open.
This code is triggered by the Occupant Restraint Controller (ORC) module based on the signal received from the driver’s seat belt pretensioner circuit.
The ORC module monitors the circuit for any open or short conditions that could affect the proper operation of the seat belt pretensioner system.
When this fault is detected, the ORC module will set code B2112 and illuminate the airbag warning light on the instrument panel.
Mechanic’s Tech Notes
For Dodge B2112 code, refer to detailed information on diagnosis, causes, and solutions.
To diagnose and fix OBDII code Dodge B2112, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Addressing these potential issues can help resolve the B2112 fault code.
FAQ
OBD code B2112 in a Dodge indicates an issue with the A/C Pressure Transducer circuit. Check for faulty transducer, wiring, or FCM. Inspect and repair as needed.
Code B2112 in a Dodge may cause the Engine Light to come on. Common symptoms include issues with the A/C Pressure Transducer or Front Control Module.
Diagnose OBD code B2112 in Dodge: Symptoms Engine Light ON. Causes Faulty A/C Pressure Transducer, harness issues, faulty FCM. Fix Inspect wiring, connectors, and components for damage.
Wrap Up
If your Dodge is displaying OBD code b2112 and you’re experiencing issues with the airbag system, it could be caused by a faulty passenger airbag disable indicator circuit.
This may be due to damaged wiring, a defective passenger airbag disable indicator switch, or a poor connection in the circuit.
To address Dodge OBD code b2112, start by inspecting the wiring harness and connectors related to the passenger airbag disable indicator circuit.
Check for any signs of damage, corrosion, or loose connections.
Test the passenger airbag disable indicator switch for proper functionality and replace if necessary.
