The OBD code B1D63 for Dodge indicates an issue with the Power Seat Switch circuit.
Symptoms include the Engine Light being ON.
This is commonly caused by a faulty Power Seat Switch or a poor electrical connection in the circuit.
While not a critical issue, it can affect comfort and convenience.
To fix, inspect the wiring harness, connectors, and components for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Dodge b1d63 OBD Code
The Dodge B1D63 fault code indicates an issue with the HVAC blend door actuator.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the steering column control module.
- Steering wheel controls may not function properly.
Causes of the Dodge b1d63 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
The fault code B1D63 on a Dodge typically indicates a fault in the HVAC control module.
- B1D63 can be caused by a faulty Power Seat Switch.
- An open or shorted Power Seat Switch harness.
- A poor electrical connection in the Power Seat Switch circuit.
- A faulty Memory Seat Module (MSMD).
Fixing Dodge Error Code b1d63 Step By Step
To resolve Dodge fault code B1D63, inspect and repair the driver’s seatbelt buckle switch circuit.
- To fix the Dodge OBDII code B1D63, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the sensor or module associated with the code.
- Replace the sensor or module if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing Dodge b1d63 Fault Code
Diagnosing and repairing fault code B1D63 on a Dodge may involve replacing a faulty HVAC blend door actuator.
The cost to diagnose and fix the Dodge OBD code B1D63 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Dodge b1d63 OBD Code
Dodge B1D63 code relates to a fault in the HVAC control module.
Dodge OBD code B1D63 indicates an error with the Park Assist Control Module.
This code is triggered by the module itself when it detects a malfunction in the park assist system.
The park assist system uses sensors to help the driver park the vehicle by alerting them to obstacles in the vehicle’s path.
When this code is set, it typically points to a fault in one of the sensors, wiring, or the control module itself.
Mechanic’s Tech Notes
For Dodge code B1D63, check for faults in the ambient temperature sensor circuit.
To diagnose and fix OBDII code Dodge B1D63, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage.
Ensure connector pins are not broken, bent, pushed out, or corroded.
Addressing these issues can help resolve the B1D63 fault code.
FAQ
OBD code B1D63 in a Dodge indicates an issue with the power seat switch circuit. Check for faulty switch, wiring, or module. Inspect and repair as needed.
Diagnose OBD code B1D63 in Dodge for Engine Light ON. Check Power Seat Switch, harness, connectors for faults. Inspect wiring for damage, broken pins, corrosion.
For OBD code B1D63 in a Dodge vehicle, common fixes include checking the power seat switch, harness, and connectors for damage or poor connections.
Wrap Up
If your Dodge is displaying OBD code b1d63, you may experience issues with the steering angle sensor.
This could be caused by a faulty sensor, wiring problems, or a poor connection in the steering angle sensor circuit.
To address Dodge OBD code b1d63, start by inspecting the wiring harness and connectors related to the steering angle sensor.
Check for any damaged wires, loose connections, or corrosion.
If everything looks good, consider replacing the steering angle sensor to resolve the problem.
