[SOLVED] Dodge B1295 Code: Dodge Park Assist Sensor Quick Fix

The OBD code B1295 for Dodge indicates an issue with Park Assist Sensor 8. This affects the Park Assist system.

Symptoms include the Engine Light being ON.

The cause could be a faulty sensor, wiring harness issues, or problems with the Park Assist Module.

It’s a moderate issue.

To fix, inspect the sensor, wiring, and connectors for any damage or poor connections.

Repair Importance Level	10.0 (Out of 10)
Estimated Repair Time	Approximately 1.0 hour
Repair Difficulty Level	10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

Symptoms of the Dodge b1295 OBD Code

The Dodge B1295 fault code indicates an issue with the driver door key cylinder switch circuit.

Symptoms: Service Engine Soon Warning Light comes on.
Intermittent loss of power steering assist.
Steering wheel may feel heavy or difficult to turn.
Steering wheel may not return to center position after turning.
Steering wheel may make a groaning or whining noise when turning.

Causes of the Dodge b1295 OBD Code

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible reasons for Dodge fault code B1295 include issues with the driver door module or wiring faults.

B1295 can be caused by a faulty Park Assist Sensor 8.
A Park Assist Sensor 8 harness that is open or shorted.
A Park Assist Sensor 8 circuit with a poor electrical connection.
A faulty Park Assist Module.

Fixing Dodge Error Code b1295 Step By Step

Address the issue by inspecting the driver door key cylinder switch for Dodge fault code B1295.

To fix the Dodge OBDII code B1295, start by reviewing the possible causes mentioned above.
Visually examine the wiring harness and connectors related to the code.
Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
If no visible issues are found, proceed to test the circuit for continuity and proper voltage supply.
Replace any damaged wiring or connectors as necessary.
Finally, reset the relevant module or perform a software update if required to clear the fault code.

Cost Of Fixing Dodge b1295 Fault Code

The repair for Dodge fault code B1295 may involve replacing the driver door key cylinder switch.

The cost to diagnose and fix Dodge OBD code B1295 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.

Details of the Dodge b1295 OBD Code

Dodge fault code B1295 relates to a circuit malfunction in the power door lock switch.

Dodge OBD code B1295 means a fault has been detected in the powertrain control module (PCM) related to the ignition switch run/start circuit.

This code is triggered by the PCM when it detects an issue with the ignition switch run/start circuit, which can include problems with the ignition switch itself, wiring, connectors, or related components.

The signal or system involved in this fault code is the ignition switch run/start circuit, which is crucial for starting the vehicle and providing power to various systems in the vehicle.

Mechanic’s Tech Notes

For Dodge code B1295, check for a faulty driver door lock switch.

To diagnose and fix OBDII code B1295 in a Dodge, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.

Verify TCM communication over the Controller Area Network (CAN) using a scan tool.

If the TCM does not respond, reprogramming or reflashing may be necessary.

Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.

This thorough inspection can help identify and resolve the issue causing the B1295 fault code.

FAQ

1. What does OBD code B1295 indicate in a Dodge vehicle?

OBD code B1295 in a Dodge indicates an issue with Park Assist Sensor 8. Check sensor, wiring, and connections for faults to resolve.

2. How can I diagnose the root cause of OBD code B1295 in my Dodge?

Diagnose OBD code B1295 in Dodge by checking Park Assist Sensor 8 and its wiring for faults. Inspect connectors for damage or corrosion.

3. What are the common symptoms associated with OBD code B1295 in a Dodge, and how can I address

Common symptoms of OBD code B1295 in a Dodge include Engine Light ON. To address, check Park Assist Sensor 8 and its wiring for faults.

Wrap Up

If your Dodge is displaying OBD code b1295 and your airbag light is illuminated, it may indicate a fault in the airbag control module or a problem with the airbag sensor circuit.

This could be caused by a faulty airbag sensor, damaged wiring, or poor connections in the airbag system.

To address Dodge OBD code b1295, start by inspecting the wiring harness and connectors related to the airbag system.

Check for any signs of damage, corrosion, or loose connections.

Test the airbag sensor and its circuit for proper functionality.

Replace any faulty components and ensure