The OBD code U1158 for Chrysler indicates a fault with the Satellite Video Receiver (SDARV) system.
Symptoms include the Engine Light being ON.
This issue can be caused by a faulty SDARV, open/shorted harness, or poor electrical connection.
While not critical, it should be addressed promptly.
To fix, inspect the wiring harness, connectors, and component for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler u1158 OBD Code
The vehicle displays communication issues between the HVAC control module and the instrument cluster.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible loss of communication with the gateway module.
- Intermittent issues with various vehicle systems.
- Difficulty starting the vehicle.
- Engine stalling while driving.
- Rough idling or poor engine performance.
Causes of the Chrysler u1158 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Chrysler fault code U1158 include communication issues within the LIN bus network.
- U1158 can be caused by a faulty Satellite Video Receiver (SDARV).
- An open or shorted Satellite Video Receiver harness.
- A poor electrical connection in the Satellite Video Receiver circuit.
Fixing Chrysler Error Code u1158 Step By Step
Address the communication issue between the HVAC control module and the instrument cluster.
- To fix the Chrysler OBDII code U1158, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors associated with the U1158 code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider performing a module reset or software update as needed.
- If the problem persists, consider replacing the module that is triggering the U1158 fault code.
Cost Of Fixing Chrysler u1158 Fault Code
The repair for Chrysler U1158 involves diagnosing and fixing a communication issue with the HVAC control module.
The cost to diagnose and fix Chrysler OBD code U1158 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the issue.
Details of the Chrysler u1158 OBD Code
Chrysler U1158 code indicates a loss of communication with the HVAC control module.
Chrysler OBD code U1158 indicates a loss of communication with the HVAC control module.
This code is triggered by the Body Control Module (BCM) when it detects a lack of communication with the HVAC control module over the Local Interconnect Network (LIN) bus.
The LIN bus is a communication network used by various modules in the vehicle to exchange data.
In this case, the BCM is unable to communicate with the HVAC control module, which could be due to a wiring issue, a faulty module, or a poor connection.
Mechanic’s Tech Notes
For Chrysler U1158 code, check for communication issues between the HVAC control module and the instrument cluster.
To diagnose and fix OBDII code U1158 in a Chrysler vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
Address any issues found during the inspection to resolve the U1158 fault code.
FAQ
OBD code U1158 in a Chrysler indicates an issue with the Satellite Video Receiver (SDARV). Check wiring harness, connectors, and components for damage or corrosion.
Common symptoms for Chrysler code U1158 include Engine Light ON, caused by issues with the Satellite Video Receiver (SDARV) or related wiring. Inspect and repair as needed.
Diagnose and repair OBD code U1158 in a Chrysler: Symptoms Engine Light ON. Causes Faulty SDARV, open/shorted harness, poor connection. Fix Inspect wiring, connectors, and components.
Wrap Up
If your Chrysler is displaying OBDII code u1158, you may experience issues with the steering angle sensor, steering angle sensor circuit, or related wiring problems.
This can lead to inaccurate steering angle readings, causing stability control system malfunctions.
To address Chrysler OBDII code u1158, check the steering angle sensor for proper operation, inspect the wiring harness for any damage or loose connections, and ensure the sensor is securely mounted.
Test the sensor’s output signal and verify that it aligns with the manufacturer’s specifications to resolve the issue effectively.
