The OBD code U1147 for Chrysler indicates a communication error between modules on the CAN Interior Bus Network.
Symptoms include the Engine Light being ON.
This issue is commonly caused by adding or removing an additional module or a faulty Totally Integrated Power Module (TIPM).
It is important to visually inspect wiring harnesses, connectors, and component pins for damage.
Fixing this involves checking and repairing any issues found during the inspection.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler u1147 OBD Code
The vehicle displays communication issues between the body control module and the instrument cluster.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Communication issues with the Gateway Module.
- Loss of communication with the Instrument Panel Cluster.
- Difficulty starting the vehicle.
- Rough idling.
Causes of the Chrysler u1147 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler U1147 include wiring issues, faulty modules, or communication network problems.
- U1147 can be caused by a faulty Totally Integrated Power Module (TIPM).
- A module added or removed from the CAN interior bus network.
Fixing Chrysler Error Code u1147 Step By Step
Repair involves checking the communication between the Body Control Module (BCM) and the Steering Control Module (SCM).
- To fix the Chrysler OBDII code U1147, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors associated with the U1147 code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, consider performing a module reset or software update to address the U1147 code.
- If the problem persists, it may be necessary to replace the module related to the U1147 fault code.
Cost Of Fixing Chrysler u1147 Fault Code
The repair for Chrysler fault code U1147 may involve diagnosing and fixing a communication issue.
The cost to diagnose and fix Chrysler OBD code U1147 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the Chrysler u1147 OBD Code
Chrysler U1147 pertains to a fault in the driver’s door module communication circuit.
Code U1147 for Chrysler vehicles indicates a loss of communication with the Instrument Panel Cluster (IPC) module.
This code is triggered by the Body Control Module (BCM) when it detects a lack of communication with the IPC module over the Controller Area Network (CAN) bus.
The IPC module is responsible for displaying various vehicle information to the driver, such as speed, fuel level, and warning messages.
When communication is lost with this module, the U1147 code is set.
Mechanic’s Tech Notes
Detailed information on Chrysler fault code U1147, including possible causes and diagnostic procedures.
To diagnose and fix OBDII code Chrysler U1147, start by checking the TCM power and ground using a multimeter.
Verify TCM communication over the CAN network with a scan tool.
If the wiring harness and connectors appear visually intact, inspect connector pins for damage, corrosion, or poor connections.
Reflashing the TCM may be necessary to resolve the issue.
If the problem persists, consider checking for any loose connections or damaged components in the TCM circuit.
FAQ
OBD code U1147 in a Chrysler indicates a fault related to an additional module added/removed from the CAN interior bus network. Check wiring and connectors for damage.
Diagnose U1147 code in Chrysler: Check for Engine Light ON. Causes: Additional module added/removed, faulty TIPM. Fix: Inspect wiring, connectors for damage, broken pins, corrosion.
Common symptoms of a U1147 code in a Chrysler vehicle include the Engine Light ON. Causes may be related to CAN bus network issues or a faulty TIPM. Fix involves inspecting wiring and connectors.
Wrap Up
If your Chrysler is displaying OBDII code u1147, you may experience issues with the steering angle sensor circuit.
This could be caused by a faulty steering angle sensor, damaged wiring, or poor connections in the system.
To address Chrysler OBDII code u1147, start by inspecting the wiring harness and connectors related to the steering angle sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
