The OBD code P2135 for Chrysler indicates a fault with the throttle position sensor circuit.
This affects the electric throttle control actuator (TP sensor 1 and 2).
Symptoms include the Engine Light being ON.
The issue is often caused by a faulty throttle control actuator or wiring harness issues.
It is a serious problem that can affect vehicle performance.
To fix it, inspect and repair any damaged components or wiring connections related to the throttle position sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler p2135 OBD Code
The vehicle may experience a lack of response from the accelerator pedal with fault code P2135.
- Symptoms: Engine Light ON.
- Reduced engine power message on the driver information center.
- Vehicle may go into limp mode.
- Engine may not respond to throttle input.
- Engine may idle roughly.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Chrysler p2135 OBD Code
Possible triggers for Chrysler fault code p2135 include throttle position sensor issues and wiring faults.
- P2135 can be caused by a faulty electric throttle control actuator (TP sensor 1 and 2).
- A Throttle Position Sensor harness that is open or shorted.
- A Throttle Position Sensor circuit with poor connection.
Fixing Chrysler Error Code p2135 Step By Step
Address the throttle position sensor or accelerator pedal position sensor circuit malfunction for Chrysler P2135.
- To fix the Chrysler OBDII code p2135, first, review the ‘Possible Causes’ mentioned above.
- Visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components.
- Inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, consider replacing the throttle position sensor (TPS).
- After replacing the TPS, clear the fault codes and perform a throttle relearn procedure using a scan tool.
- If the problem persists, further diagnosis of the throttle body and related components may be necessary.
Cost Of Fixing Chrysler p2135 Fault Code
The repair for Chrysler fault code P2135 typically involves replacing the throttle position sensor.
The cost to diagnose and fix a Chrysler OBD code P2135 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
Details of the Chrysler p2135 OBD Code
Chrysler P2135 code indicates a throttle/pedal position sensor/switch A/B voltage correlation issue.
Code P2135 for Chrysler vehicles indicates a Throttle/Pedal Position Sensor/Switch A/B Voltage Correlation.
This code is triggered when the Powertrain Control Module (PCM) detects that the correlation between the throttle position sensor and the pedal position sensor is not within the expected range.
This can lead to issues with throttle response and drivability.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Chrysler fault code p2135 related to throttle/pedal position sensor/switch A/B voltage correlation.
To diagnose and fix OBDII code P2135 in a Chrysler vehicle, start by checking the throttle position sensor (TPS) and pedal position sensor voltages using a voltmeter.
Ensure they are within specifications.
Use a scan tool to monitor sensor data and confirm proper operation.
Inspect the wiring harness and connectors for any damage, corrosion, or poor connections.
Pay close attention to the throttle body connector and wiring.
Clean or repair any issues found.
If the problem persists, consider recalibrating or replacing the throttle body assembly.
Remember to clear the fault code after making any repairs.
FAQ
Common symptoms of OBD code P2135 in a Chrysler vehicle include Engine Light ON and possible causes are faulty throttle control actuator or sensor issues. Fix involves inspecting wiring and connectors.
The typical cause of OBD code P2135 in a Chrysler vehicle is a faulty electric throttle control actuator (TP sensor 1 and 2). Check wiring harness and connectors for issues.
Diagnose and repair OBD code P2135 in a Chrysler: Symptoms Engine Light ON; Causes Faulty throttle control actuator, TP sensor issues; Fix Inspect wiring, connectors for damage.
Wrap Up
If your Chrysler is displaying OBDII code P2135 and experiencing issues like sudden loss of power, unresponsive throttle, or stalling, it could be caused by a faulty throttle position sensor, accelerator pedal position sensor, or wiring/connectivity problems in the throttle control system.
To address Chrysler OBDII code P2135, start by inspecting the throttle body, throttle position sensor, and accelerator pedal position sensor for any signs of wear or damage.
Check the wiring harness and connectors for any corrosion, fraying, or loose connections.
Consider replacing any faulty sensors or repairing damaged wiring to resolve
