The OBD code P113C for Chrysler indicates an issue with the Smart Oxygen Module.
Symptoms include the Engine Light being ON.
This fault code is commonly caused by a faulty Smart Oxygen Module, open or shorted harness, or poor electrical connection.
It’s important to address this issue promptly to prevent potential drivability issues.
A possible fix involves inspecting the wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler p113c OBD Code
The vehicle may experience issues related to the fuel pressure sensor circuit performance (P113C).
- Symptoms: Engine Light ON.
- Possible lack of power during acceleration.
- Rough idle.
Causes of the Chrysler p113c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler fault code P113C include issues with the heated oxygen sensor.
- P113C can be caused by a faulty Smart Oxygen Module.
- A Smart Oxygen Module harness that is open or shorted.
- A Smart Oxygen Module circuit with a poor electrical connection.
Fixing Chrysler Error Code p113c Step By Step
Address the issue by inspecting the intake air system for leaks or restrictions.
- To fix the Chrysler OBDII code P113C, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If any issues are found, repair or replace the damaged components as necessary.
- Perform a thorough inspection of the oxygen sensor and its wiring for any faults.
- Replace the oxygen sensor if it is faulty or not functioning correctly.
- Clear the fault code using a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing Chrysler p113c Fault Code
Diagnosing and repairing Chrysler fault code P113C may involve inspecting and replacing the intake air temperature sensor.
The cost to diagnose and fix the Chrysler OBD code P113C typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
Details of the Chrysler p113c OBD Code
Chrysler fault code P113C relates to an issue with the intake manifold runner control.
Code P113C for Chrysler vehicles indicates a fault with the Bank 1, Sensor 1 oxygen sensor.
This sensor is located in the exhaust system before the catalytic converter.
The ECM triggers this code when it detects that the oxygen sensor is not responding within the expected parameters, indicating a potential issue with the airfuel mixture in the engine.
This code is related to the signal or system that monitors the airfuel ratio in the exhaust gases to ensure proper engine performance and emissions control.
Mechanic’s Tech Notes
Detailed information on Chrysler fault code P113C, including symptoms, causes, and diagnostic procedures.
To diagnose and fix OBDII code P113C on a Chrysler vehicle, start by visually inspecting the wiring harness and connectors related to the TCM (Transmission Control Module).
Look for any damaged components and check the connector pins for signs of being broken, bent, pushed out, or corroded.
Next, use a multimeter to check the power and ground connections to the TCM.
Ensure proper voltage levels are present.
Additionally, use a scan tool to verify if the TCM is responding over the CAN network.
If necessary, consider reprogramming or reflashing the TCM to address the fault code.
FAQ
Common symptoms for Chrysler OBD code P113C include Engine Light ON. Causes may be a faulty Smart Oxygen Module or related wiring issues. Inspect and repair as needed.
The typical root cause of OBD code P113C in Chrysler vehicles is a faulty Smart Oxygen Module or issues with its harness or circuit connections.
Diagnose and repair OBD code P113C in a Chrysler: Symptoms Engine Light ON; Causes Faulty Smart Oxygen Module, harness issues; Fix Inspect wiring, connectors for damage.
Wrap Up
If your Chrysler is displaying OBDII code P113C, you may experience poor engine performance, rough idling, or decreased fuel efficiency.
This code typically indicates an issue with the Bank 1 Sensor 1 oxygen sensor, a wiring problem in the oxygen sensor circuit, or a faulty oxygen sensor heater element.
To address Chrysler OBDII code P113C, start by inspecting the wiring harness and connectors related to the Bank 1 Sensor 1 oxygen sensor.
Test the oxygen sensor heater element for proper operation and replace the sensor if necessary.
Ensure all connections are secure and free of corrosion
