The OBD code P0752 for Chrysler indicates a problem with the Shift Solenoid A Circuit Low.
This affects the transmission system.
Symptoms include the engine light being on and the transmission not shifting gears properly.
Causes can include low or dirty transmission fluid, faulty solenoid valve, or issues with the wiring harness.
This issue should be addressed promptly to prevent further transmission damage.
A possible fix is to inspect and repair any damaged components or wiring connections related to the shift solenoid valve.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler p0752 OBD Code
The vehicle may experience harsh shifting or failure to shift into a specific gear.
- Symptoms: Engine Light ON.
- Transmission will not shift gears.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Chrysler p0752 OBD Code
Possible reasons for Chrysler fault code P0752 include issues with the shift solenoid A stuck on.
- P0752 can be caused by a low transmission fluid level.
- Dirty transmission fluid.
- A faulty solenoid valve.
- Shift Solenoid valve harness or connectors.
- Shift Solenoid valve circuit is open or shorted.
Fixing Chrysler Error Code p0752 Step By Step
Address the issue by inspecting the transmission control solenoid circuit for Chrysler fault code P0752.
- To fix the Chrysler OBDII code P0752, start by reviewing the possible causes related to the shift solenoid A circuit.
- Visually inspect the wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the shift solenoid A for proper operation and resistance.
- Replace the shift solenoid A if necessary.
- Clear the fault codes and perform a test drive to ensure the issue is resolved.
Cost Of Fixing Chrysler p0752 Fault Code
The repair for Chrysler fault code P0752 typically involves replacing the shift solenoid.
The cost to diagnose and fix the Chrysler OBD code P0752 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler p0752 OBD Code
Code P0752 in a Chrysler indicates a problem with the transmission shift solenoid A stuck on.
Code P0752 for Chrysler vehicles indicates a problem with the Shift Solenoid A stuck on.
This code is triggered by the Powertrain Control Module (PCM) when it detects an electrical issue with the transmission shift solenoid A circuit.
The shift solenoid A is responsible for controlling the flow of transmission fluid to engage the appropriate gear for the driving conditions.
When this solenoid gets stuck in the on position, it can cause issues with shifting gears smoothly.
The PCM monitors the voltage signals from the solenoid to determine if it is functioning correctly.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Chrysler fault code P0752 related to the transmission solenoid circuit.
To diagnose and fix OBDII code P0752 in a Chrysler vehicle, start by checking the transmission control module (TCM) power and ground using a multimeter.
Ensure proper voltage levels are present.
Use a scan tool to confirm TCM communication over the Controller Area Network (CAN) network.
If communication issues are detected, consider reprogramming or reflashing the TCM.
Additionally, inspect the wiring harness and connectors for any damage, and check for broken, bent, or corroded pins.
Address any issues found during the visual inspection to resolve the P0752 fault code effectively.
FAQ
Symptoms of P0752 in a Chrysler: Engine Light ON, transmission won’t shift. Causes: low/dirty fluid, faulty solenoid, wiring issues. Fix: Check fluid, inspect solenoid, wiring, connectors for damage.
A typical cause of a P0752 code in a Chrysler transmission system is a faulty shift solenoid valve or issues with the shift solenoid valve circuit.
To diagnose and repair a P0752 code in a Chrysler vehicle at home, check transmission fluid level, inspect solenoid valve, harness, connectors for damage, corrosion.
Wrap Up
If your Chrysler is experiencing shifting issues and showing OBDII code P0752, it could be caused by a faulty shift solenoid, low transmission fluid level, a damaged wiring harness, or a poor electrical connection at the transmission control module.
To address Chrysler OBDII code P0752, check the transmission fluid level and condition, inspect the wiring harness for any damage or corrosion, test the shift solenoid for proper operation, and ensure all electrical connectors at the transmission control module are securely connected.
