The OBD code P0732 for Chrysler indicates an issue with the transmission’s gear 2 ratio.
Symptoms include the Engine Light ON, incorrect shifting, and poor transmission performance.
Common causes are low/dirty transmission fluid, faulty shift solenoids, or wiring issues.
This problem should be addressed promptly to prevent further damage.
A possible fix involves inspecting and repairing any damaged components or wiring connections related to the shift solenoids.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler p0732 OBD Code
The vehicle may experience incorrect gear ratio in second gear.
- Symptoms: Engine Light ON.
- Incorrect transmission shifting.
Causes of the Chrysler p0732 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
P0732 in a Chrysler indicates incorrect gear ratio in second gear.
- P0732 can be caused by low transmission fluid level.
- Dirty transmission fluid.
- Faulty Shift Solenoids.
- Shift Solenoids harness is open or shorted.
- Shift Solenoids circuit poor electrical connection.
- Transmission mechanical problems.
- Transmission hydraulic control circuit.
Fixing Chrysler Error Code p0732 Step By Step
Inspect transmission fluid level and condition, then address any issues found accordingly.
- To fix the Chrysler OBDII code P0732, start by reviewing the possible causes and visually examining the wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the transmission fluid level and condition to ensure it meets manufacturer specifications.
- Inspect the transmission for any internal damage or mechanical issues that may be causing incorrect gear ratio readings.
- If no issues are found with the wiring, connectors, fluid level, or transmission components, consider performing a transmission control module (TCM) reset or reprogramming.
- If the problem persists, it may be necessary to replace the TCM with a new or remanufactured unit to address the P0732 fault code.
Cost Of Fixing Chrysler p0732 Fault Code
The repair for Chrysler fault code P0732 typically involves diagnosing and fixing transmission gear ratio issues.
The cost to diagnose and fix the Chrysler OBD code P0732 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the transmission issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler p0732 OBD Code
Chrysler fault code P0732 relates to incorrect gear ratio detected in second gear.
Code P0732 for Chrysler vehicles indicates a Gear 2 Incorrect Ratio.
This means that the transmission is not shifting properly from Gear 1 to Gear 2. The Transmission Control Module (TCM) triggers this fault code based on input from the transmission speed sensors and gear position sensors.
It typically points to issues with the transmission components such as clutch slippage, hydraulic pressure problems, or internal mechanical failures.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Chrysler fault code P0732 related to incorrect gear ratio in second gear.
To diagnose and fix OBDII code P0732 in a Chrysler vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Ensure proper voltage levels are present.
Use a scan tool to confirm TCM communication over the Controller Area Network (CAN) network.
If communication issues are detected, consider reprogramming or reflashing the TCM.
Additionally, inspect the wiring harness and connectors for any damage, and check for broken, bent, or corroded pins.
Address any issues found during the visual inspection to resolve the P0732 fault code effectively.
FAQ
Common causes of OBD code P0732 in a Chrysler vehicle include low transmission fluid, dirty fluid, faulty shift solenoids, and transmission mechanical or hydraulic issues.
OBD code P0732 in a Chrysler indicates incorrect gear ratio in 2nd gear. It’s serious and not safe to continue driving. Check transmission fluid level and condition.
Diagnose P0732 by checking transmission fluid level, inspecting shift solenoids, and examining wiring harness for damage. Repair as needed based on findings.
Wrap Up
If your Chrysler is displaying OBDII code P0732 and experiencing harsh shifting, slipping gears, or delayed engagement, it may be caused by low transmission fluid, a faulty transmission shift solenoid, a damaged wiring harness, or internal transmission issues.
To address Chrysler OBDII code P0732, start by checking the transmission fluid level and condition.
Inspect the transmission shift solenoids, wiring connectors, and harness for any signs of damage or corrosion.
Consider performing a thorough transmission fluid flush and filter replacement if needed.
