The OBD code P0344 for Chrysler indicates a problem with the Camshaft Position Sensor Circuit A Intermittent Bank 1 or Single Sensor.
Symptoms include the engine light being on, lack of power, and engine stalling.
Causes can range from a faulty sensor to a loose camshaft tone wheel.
This issue should be addressed promptly to prevent further engine damage.
A possible fix involves inspecting and repairing any damaged wiring or connectors related to the camshaft position sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Chrysler p0344 OBD Code
The vehicle may experience intermittent or complete loss of camshaft position sensor signal.
- With Chrysler OBD code P0344, the Engine Light will be ON.
- Lack/Loss of Power may be experienced.
- Engine Stall can occur.
Causes of the Chrysler p0344 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Chrysler fault code P0344 include camshaft position sensor issues or wiring problems.
- Chrysler OBD code P0344 can be caused by low engine oil.
- A faulty Camshaft Position (CMP) Sensor.
- An open or shorted Camshaft Position Sensor harness.
- A poor electrical connection in the Camshaft Position Sensor circuit.
- A faulty Powertrain Control Module (PCM).
- A loose/damaged or misaligned Camshaft Tone Wheel.
- A dead (weak) battery.
Fixing Chrysler Error Code p0344 Step By Step
Address the issue by inspecting the camshaft position sensor and its wiring for faults or damage.
- To fix the Chrysler OBDII code P0344, start by reviewing the possible causes mentioned above.
- Visually examine the camshaft position sensor and its wiring harness for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- Replace the camshaft position sensor if any issues are found during inspection.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Test drive the vehicle to ensure the code does not return.
Cost Of Fixing Chrysler p0344 Fault Code
The repair for Chrysler fault code P0344 typically involves replacing the camshaft position sensor.
The cost to diagnose and fix a Chrysler OBD code P0344 typically ranges from $75 to $150 per hour for labor rates.
With an estimated repair time of 1. 0 hour, the total cost can be around $75 to $150, depending on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler p0344 OBD Code
Chrysler fault code P0344 relates to a camshaft position sensor signal intermittent issue.
Code P0344 for Chrysler vehicles means that a problem has been detected in the camshaft position sensor circuit for bank 1. This code is triggered by the Engine Control Module (ECM) when it detects that the camshaft position sensor signal is intermittent or has a problem.
The camshaft position sensor is responsible for providing the ECM with information about the camshaft’s position and speed, which is crucial for proper fuel injection and ignition timing.
When the ECM detects an issue with this sensor, it can lead to drivability issues and potential engine stalling.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Chrysler fault code P0344 related to Camshaft Position Sensor Circuit Intermittent.
To diagnose and fix OBDII code P0344 in a Chrysler vehicle, start by visually inspecting the camshaft position sensor and its wiring harness for any damage or loose connections.
Use a voltmeter to check the sensor’s voltage and ground.
Ensure the sensor is receiving proper voltage.
If the sensor and wiring look good, consider testing the sensor’s signal with a scan tool while cranking the engine.
If the signal is erratic or absent, the sensor may need replacement.
Additionally, check the timing belt for proper alignment.
If all checks out, consider reprogramming the engine control module (ECM) as a last resort.
FAQ
Common symptoms of OBD code P0344 in a Chrysler vehicle include Engine Light ON, lack of power, engine stall. Causes: faulty CMP sensor, wiring issues. Fix: inspect wiring and connectors.
The typical cause of OBD code P0344 in a Chrysler vehicle is a faulty Camshaft Position (CMP) Sensor or related wiring issues.
Diagnose and repair P0344 in a Chrysler: Check CMP sensor, wiring, connectors for damage. Inspect camshaft tone wheel. Verify battery health. Review and repair as needed.
Wrap Up
If your Chrysler is displaying OBDII code p0344 and experiencing rough idling or stalling, it may be caused by a faulty camshaft position sensor, damaged wiring in the sensor circuit, or incorrect sensor installation.
To address Chrysler OBDII code p0344, first, inspect the camshaft position sensor and its wiring harness for any visible damage.
Ensure the sensor is correctly installed and securely connected.
If no issues are found, consider replacing the camshaft position sensor to resolve the problem effectively.
