The OBD code P0157 for Chrysler indicates a fault with the Rear Heated Oxygen Sensor Bank 2. Symptoms include the Engine Light ON, high fuel consumption, and excessive exhaust smoke.
Causes can be a faulty sensor, wiring issues, fuel pressure problems, or intake/exhaust leaks.
This issue should be addressed promptly to prevent further damage.
A possible fix involves inspecting and repairing the sensor and related wiring connections.
| Repair Importance Level | 6.67 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Chrysler p0157 OBD Code
The vehicle may experience issues related to the oxygen sensor circuit low voltage (Bank 2, Sensor 2).
- Symptoms for Chrysler OBD code P0157 include: Engine Light ON.
- High Fuel Consumption.
- Excessive Smoke from Exhaust.
Causes of the Chrysler p0157 OBD Code
Possible triggers for Chrysler fault code P0157 include oxygen sensor issues and wiring faults.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- P0157 can be caused by a Faulty Rear Heated Oxygen Sensor Bank 2.
- A Rear Heated Oxygen Sensor Bank 2 harness that is open or shorted.
- A Rear Heated Oxygen Sensor Bank 2 circuit with poor electrical connection.
- Inappropriate fuel pressure.
- Faulty fuel injectors.
- Intake air leaks that may be faulty.
- Exhaust gas leaks.
Fixing Chrysler Error Code p0157 Step By Step
Address the issue by inspecting the Bank 2 Sensor 2 oxygen sensor circuit for Chrysler P0157.
- To fix the Chrysler OBDII code P0157, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the Bank 2 Sensor 2 oxygen sensor.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If the wiring and connectors appear to be in good condition, proceed to test the oxygen sensor itself for proper operation.
- Replace the Bank 2 Sensor 2 oxygen sensor if it is faulty.
- Clear the fault codes from the vehicle’s computer using a scan tool.
- Finally, test drive the vehicle to ensure the code does not return, indicating a successful repair.
Cost Of Fixing Chrysler p0157 Fault Code
The repair for Chrysler fault code P0157 typically involves replacing the oxygen sensor.
The cost to diagnose and fix a Chrysler OBD code P0157 typically ranges from $75 to $150 for labor rates per hour.
With an estimated repair time of 1. 0 hour, the total cost could be around $75 to $150, depending on shop rates and the complexity of the issue.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler p0157 OBD Code
Chrysler fault code P0157 relates to a low voltage condition in the bank 2 sensor 2 oxygen sensor.
Code P0157 for Chrysler vehicles indicates a low voltage condition in the Bank 2, Sensor 2 oxygen sensor circuit.
This sensor is located after the catalytic converter.
The Engine Control Module (ECM) triggers this code when it detects a voltage signal below a specified range from the Bank 2, Sensor 2 oxygen sensor.
This sensor is responsible for monitoring the efficiency of the catalytic converter by measuring the oxygen content in the exhaust gases.
Mechanic’s Tech Notes
Detailed information on Chrysler fault code P0157, including possible causes and diagnostic steps.
To diagnose and fix OBDII code P0157 in a Chrysler vehicle, start by checking the wiring harness and connectors related to the Bank 2 Sensor 2 oxygen sensor.
Use a voltmeter to test the sensor’s voltage signal.
Ensure the sensor is receiving power and ground.
If the wiring looks good, the sensor itself may be faulty and need replacement.
Scan tools can help monitor sensor data and confirm proper operation.
Additionally, inspect the exhaust system for leaks that could affect sensor readings.
Clear the code after any repairs and monitor for recurrence.
FAQ
Common causes of OBD code P0157 in a Chrysler vehicle include a faulty rear heated oxygen sensor Bank 2, wiring issues, fuel pressure problems, and intake/exhaust leaks.
Diagnose and fix OBD code P0157 in your Chrysler by checking rear oxygen sensor, wiring, fuel system, and intake/exhaust for issues. Inspect and repair damaged components and connectors.
Yes, OBD code P0157 can cause drivability issues like high fuel consumption and damage if not addressed promptly. Check and repair rear oxygen sensor and related components.
Wrap Up
If your Chrysler is displaying OBDII code P0157, you may experience poor fuel economy, rough idling, or a decrease in engine performance.
This code typically indicates an issue with the oxygen sensor bank 2 sensor 2, a faulty sensor, wiring problems, or an exhaust leak near the sensor.
To address Chrysler OBDII code P0157, start by inspecting the oxygen sensor bank 2 sensor 2 and its wiring harness for any signs of damage or corrosion.
Test the sensor’s functionality and replace it if necessary.
Ensure the exhaust system is free from leaks that could
