The OBD code C212A for Chrysler indicates a fault in the ABS pump motor supply voltage circuit.
Symptoms include the ABS warning light and engine light being illuminated.
Causes can be a faulty ABS pump motor, open or shorted harness, or poor electrical connection.
This issue is serious as it affects the vehicle’s braking system.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler c212a OBD Code
The vehicle displays a warning light indicating a communication error with the tire pressure monitoring system.
- Symptoms for Chrysler OBD code C212A may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Unusual noises coming from the ABS system.
- Braking performance may feel different than usual.
- The vehicle may exhibit erratic behavior when braking.
Causes of the Chrysler c212a OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues related to Chrysler fault code C212A include faulty wheel speed sensor or wiring problems.
- C212A can be caused by a faulty wheel speed sensor.
- An open or shorted harness.
- Poor electrical connection in the sensor circuit.
Fixing Chrysler Error Code c212a Step By Step
Resolve the Chrysler C212A code by inspecting the tire pressure monitoring system for faults.
- To fix the Chrysler OBDII code C212A, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a diagnostic scan tool test to check for ABS module communication.
- Reset the ABS module if necessary.
- Replace the ABS module if communication issues persist.
Cost Of Fixing Chrysler c212a Fault Code
Diagnosing and repairing Chrysler fault code C212A may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix Chrysler OBD code C212A depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
Details of the Chrysler c212a OBD Code
C212A code indicates a steering angle sensor internal fault in Chrysler vehicles.
Chrysler OBD code C212A means the Tire Pressure Monitoring System (TPMS) has detected a malfunction in the tire pressure sensor.
This code is triggered by the TPMS module when it receives abnormal or outofrange signals from the tire pressure sensor associated with a specific wheel.
The system monitors tire pressure using sensors located in each wheel, and when a discrepancy is detected, it triggers this fault code to alert the driver of a potential issue with tire pressure.
Mechanic’s Tech Notes
For Chrysler C212A code, refer to detailed information for diagnostic and repair procedures.
To diagnose and fix OBDII code C212A in a Chrysler vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address the root cause of the C212A fault code.
FAQ
OBD code C212A in a Chrysler means an issue with the ABS system. Check for faulty wiring, poor connections, or damaged components. Inspect and repair as needed.
Common symptoms for Chrysler code C212A include ABS warning light on, engine light on, caused by faulty wiring harness, poor connection. Fix: Inspect and repair wiring connections.
Diagnose OBD code C212A in a Chrysler: Symptoms ABS & Engine Light ON. Causes Faulty harness, poor connection. Fix Inspect wiring, connectors for damage or corrosion.
Wrap Up
If your Chrysler is displaying OBDII code c212a along with ABS or traction control warning lights, it may indicate a fault in the steering angle sensor circuit.
This could be caused by a malfunctioning steering angle sensor, damaged wiring, or poor connections in the system.
To address Chrysler OBDII code c212a, start by inspecting the wiring harness and connectors related to the steering angle sensor.
Look for any signs of wear, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
