The OBD code C101C for Chrysler indicates a fault in the Right Front Wheel Speed Sensor circuit of the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
Possible causes are tire air pressure mismatch, a faulty sensor, wiring issues, or a defective ABS Module.
This issue should be addressed promptly to ensure safe braking.
A potential fix involves inspecting and repairing the sensor circuit and related components.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler c101c OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Strange noises from the ABS system.
- Difficulty braking in certain conditions.
Causes of the Chrysler c101c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler fault code C101C include ABS module communication issues and wiring faults.
- C101C can be caused by tire air pressure mismatch.
- A faulty Right Front Wheel Speed Sensor.
- The Right Front Wheel Speed Sensor harness is open or shorted.
- A Right Front Wheel Speed Sensor circuit poor electrical connection.
- A faulty AntiLock Brake System (ABS) Module.
Fixing Chrysler Error Code c101c Step By Step
To address fault code C101C on a Chrysler, inspect the ABS module for internal faults.
- To fix the Chrysler OBDII code C101C, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a reset on the ABS module using a scan tool.
- Test drive the vehicle to see if the code returns.
- If the code persists, consider replacing the ABS module with a new one and program it to the vehicle as needed.
Cost Of Fixing Chrysler c101c Fault Code
The repair for Chrysler fault code C101C may involve diagnosing and fixing a faulty ABS module.
The cost to diagnose and fix Chrysler OBD code C101C is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any additional parts or services needed.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler c101c OBD Code
C101C code indicates a problem with the ABS hydraulic pump motor circuit.
Chrysler OBD code C101C indicates an issue with the ABS hydraulic pump motor circuit.
This code is triggered by the AntiLock Brake System (ABS) module when it detects a malfunction in the hydraulic pump motor circuit.
The ABS module monitors the voltage and current to the pump motor to ensure proper operation.
If there is a fault in the circuit, such as a wiring issue, a faulty pump motor, or a problem with the ABS module itself, the C101C trouble code will be set.
This code specifically relates to the hydraulic pump motor circuit within the ABS system on Chrysler vehicles.
Mechanic’s Tech Notes
For Chrysler C101C code, this section provides detailed diagnostic and repair information for technicians.
To diagnose OBDII code C101C in a Chrysler, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of corrosion, bending, or breakage.
This thorough inspection can help identify and resolve the issue causing the C101C fault code.
FAQ
Common symptoms of OBD code C101C in a Chrysler vehicle include ABS warning light on, engine light on, caused by issues with wheel speed sensor or ABS module.
Possible causes of OBD code C101C in a Chrysler vehicle include tire air pressure mismatch, faulty right front wheel speed sensor, sensor harness issues, or ABS module problems.
Diagnose OBD code C101C in Chrysler: Symptoms ABS & Engine Lights ON. Causes Tire pressure mismatch, faulty wheel speed sensor. Fix Inspect wiring, connectors, sensor for damage.
Wrap Up
If your Chrysler is displaying OBDII code c101c and experiencing ABS system malfunctions or erratic wheel speed sensor readings, it could be caused by damaged wheel speed sensors, faulty wiring connections, or a malfunctioning ABS module.
To address Chrysler OBDII code c101c, inspect the wheel speed sensors for physical damage or contamination, check the wiring harness for any breaks or corrosion, and test the ABS module for proper functionality.
Replace any faulty components and ensure all connections are secure to resolve the issue effectively.
