The OBD code B2335 for Chrysler indicates a fault with the Horn Control Relay circuit.
Symptoms include the Engine Light being ON.
This issue is commonly caused by a faulty Horn Control Relay or related wiring issues.
It is not a serious problem but should be addressed promptly.
To fix it, inspect the relay, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler b2335 OBD Code
The vehicle displays a fault code B2335 on the Chrysler’s diagnostic system.
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Intermittent loss of power steering assist.
- Steering wheel may be difficult to turn.
- Steering wheel may make a whining noise when turning.
Causes of the Chrysler b2335 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler fault code B2335 include issues with the driver door module.
- B2335 can be caused by a faulty Horn Control Relay.
- A Horn Control Relay harness that is open or shorted.
- A Horn Control Relay circuit with poor electrical connection.
- A faulty Body Control Module (BCM).
Fixing Chrysler Error Code b2335 Step By Step
Address the faulty Occupant Restraint Controller (ORC) module to resolve Chrysler B2335.
- To fix Chrysler OBDII code B2335, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the circuit.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors found during the inspection.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify that the code does not return, indicating a successful repair.
Cost Of Fixing Chrysler b2335 Fault Code
The repair for Chrysler fault code B2335 involves diagnosing and fixing an issue with the driver’s door module.
The cost to diagnose and fix Chrysler OBD code B2335 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
Details of the Chrysler b2335 OBD Code
Chrysler fault code B2335 relates to the rear door lock switch circuit.
Chrysler OBD code B2335 indicates a problem with the occupant classification module.
This module is responsible for determining whether the passenger seat is occupied and the weight of the occupant.
The signal involved in this system is related to the data communicated between the occupant classification module and the vehicle’s main computer.
When this code is triggered, it typically means there is a fault in the system that needs to be diagnosed and repaired to ensure proper operation of the occupant classification system.
Mechanic’s Tech Notes
Chrysler fault code B2335 relates to the driver’s door lock switch circuit being stuck.
To diagnose and fix OBDII code Chrysler B2335, start by visually inspecting the wiring harness and connectors related to the Transmission Control Module (TCM).
Look for any damaged components and check connector pins for signs of damage or corrosion.
Use a multimeter to check TCM power and ground connections.
Additionally, use a scan tool to verify if the TCM is communicating over the Controller Area Network (CAN) network.
If necessary, consider reprogramming or reflashing the TCM.
This process can help identify and address issues related to the B2335 fault code.
FAQ
OBD code B2335 in a Chrysler indicates an issue with the Horn Control Relay. Check relay, wiring, and connectors for faults to resolve.
Diagnose a B2335 fault code in a Chrysler by checking the horn control relay, its harness, and BCM. Inspect wiring for damage or poor connections.
Common symptoms of a B2335 fault code in a Chrysler vehicle include the Engine Light ON and possible issues with the Horn Control Relay circuit.
Wrap Up
If your Chrysler is displaying OBDII code b2335 and experiencing issues with the driver’s door ajar indicator, it may be caused by a faulty door ajar switch, damaged wiring in the door jamb, or a malfunctioning Body Control Module (BCM).
To address Chrysler OBDII code b2335, start by inspecting the wiring harness and connectors related to the driver’s door ajar switch.
Test the switch for proper operation and replace if necessary.
Ensure the BCM is functioning correctly and reprogram if needed.
