The OBD code B2225 for Chrysler indicates a fault in the Steering Column Control Module (SCCM).
Symptoms include the Engine Light being ON.
The issue is typically caused by a faulty SCCM, open/shorted SCCM harness, or poor electrical connection.
While not a critical problem, it should be addressed promptly.
To fix it, inspect the wiring harness, connectors, and component for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler b2225 OBD Code
The Chrysler B2225 fault code typically triggers when there is an issue with the occupant classification system.
- Symptoms: Service Engine Soon Warning Light ON.
- Intermittent loss of power steering assist.
- Steering wheel may feel heavy or difficult to turn.
- Steering wheel may not return to center position after turning.
- Steering wheel may make groaning or whining noises when turning.
Causes of the Chrysler b2225 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler fault code B2225 include faulty occupant classification module or wiring issues.
- B2225 can be caused by a faulty Steering Column Control Module (SCCM).
- A Steering Column Control Module (SCCM) harness that is open or shorted.
- A Steering Column Control Module (SCCM) circuit with a poor electrical connection.
Fixing Chrysler Error Code b2225 Step By Step
Address the faulty Occupant Restraint Controller Module (ORC) to resolve Chrysler B2225.
- To fix Chrysler OBDII code B2225, start by reviewing the possible causes and visually inspecting the wiring harness and connectors for any damage.
- Check the connector pins for any signs of being broken, bent, pushed out, or corroded.
- Test the circuit for proper voltage and continuity.
- Replace the faulty occupant classification module if necessary.
- Perform a module reset or reprogramming to ensure proper functionality.
Cost Of Fixing Chrysler b2225 Fault Code
Repairing fault code B2225 on a Chrysler may involve replacing the occupant classification module.
The cost to diagnose and fix Chrysler OBD code B2225 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler b2225 OBD Code
Chrysler fault code B2225 relates to the occupant classification module.
Chrysler OBD code B2225 means the Driver’s Seatbelt Tension Reducer Circuit Open.
This code is triggered by the Occupant Restraint Controller (ORC) when it detects an open circuit in the driver’s seatbelt tension reducer system.
The seatbelt tension reducer system is designed to tighten the seatbelt in the event of a collision to help secure the driver in place.
When the ORC detects an open circuit in this system, it sets code B2225 to indicate a fault in the driver’s seatbelt tension reducer circuit.
Mechanic’s Tech Notes
For Chrysler B2225, check for a faulty occupant classification module or wiring issues.
To diagnose and fix OBDII code Chrysler B2225, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.
If no visible issues are found, consider reprogramming the TCM.
Reflashing the TCM may resolve the communication error causing the B2225 code.
FAQ
OBD code B2225 in a Chrysler indicates an issue with the Steering Column Control Module (SCCM). Check for faulty module, wiring, or poor connections.
Diagnose a B2225 fault code in a Chrysler by checking for a faulty Steering Column Control Module (SCCM), open/shorted harness, or poor electrical connection.
Common symptoms of a B2225 trouble code in a Chrysler vehicle include the Engine Light ON and possible issues with the Steering Column Control Module (SCCM).
Wrap Up
If your Chrysler is displaying OBDII code b2225 and your airbag light is illuminated, it may indicate a fault in the driver’s seat belt tension sensor circuit.
This could be caused by a damaged sensor, wiring issue, or a poor connection.
To address Chrysler OBDII code b2225, start by inspecting the wiring harness and connectors related to the driver’s seat belt tension sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
