The OBD code B220C for Chrysler indicates an issue with the Occupant Restraint Controller (ORC) system.
Symptoms include the Air Bag Warning Light being ON.
This is commonly caused by a faulty ORC, open/shorted ORC harness, or poor electrical connection.
While not a critical issue, it should be addressed promptly.
To fix, inspect the ORC system components, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the Chrysler b220c OBD Code
The specific fault code B220C in a Chrysler indicates a communication error with the vehicle’s occupant restraint controller.
- Symptoms: Air Bag Warning Light ON
Causes of the Chrysler b220c OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler B220C include faulty steering angle sensor, wiring issues, or module malfunctions.
- B220C can be caused by a faulty Occupant Restraint Controller (ORC).
- An open or shorted Occupant Restraint Controller (ORC) harness.
- Poor electrical connection in the Occupant Restraint Controller (ORC) circuit.
Fixing Chrysler Error Code b220c Step By Step
Address the issue by inspecting the driver’s door ajar switch and related wiring for faults.
- To fix the Chrysler OBDII code B220C, start by reviewing the possible causes and visually inspecting the wiring harness and connectors.
- Check for any damaged components and examine the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found during the visual inspection, proceed to test the circuit for continuity and proper voltage supply.
- Replace any damaged wiring or connectors as necessary.
- Finally, reset the module or perform a software update to clear the fault code and ensure proper operation.
Cost Of Fixing Chrysler b220c Fault Code
The repair for Chrysler fault code B220C may involve replacing the vehicle’s occupant restraint controller module.
The cost to diagnose and fix Chrysler OBD code B220C depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chrysler b220c OBD Code
The Chrysler B220C code indicates a fault in the vehicle’s front wiper motor circuit.
Chrysler OBD code B220C means that the vehicle’s ignition key has an invalid key code.
This code is triggered by the Wireless Ignition Node (WIN) module based on the key code signal received from the key fob.
The WIN module is responsible for validating the key code and allowing the vehicle to start.
If an invalid key code is detected, the B220C trouble code is set in the system.
Mechanic’s Tech Notes
For Chrysler B220C code, this section provides detailed diagnostic and repair information.
To diagnose and fix OBDII code B220C in a Chrysler vehicle, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the B220C fault code.
FAQ
Common symptoms for Chrysler OBD code B220C include Air Bag Warning Light ON. Causes may be a faulty Occupant Restraint Controller (ORC) or related wiring issues. Fix: Inspect and repair wiring connections.
OBD code B220C in Chrysler vehicles is typically caused by a faulty Occupant Restraint Controller (ORC), ORC harness issues, or poor electrical connections.
Diagnose OBD code B220C in Chrysler: Symptoms Air Bag Warning Light ON. Causes Faulty ORC, harness issues. Fix Inspect wiring, connectors for damage, poor connections, corrosion.
Wrap Up
If your Chrysler is displaying OBDII code b220c and experiencing issues with the driver’s door ajar indicator, it may be caused by a faulty door ajar switch, wiring problems, or a malfunctioning Body Control Module (BCM).
To address Chrysler OBDII code b220c, start by inspecting the wiring harness and connectors related to the driver’s door ajar switch.
Test the switch for proper operation and check for any loose connections or damaged wiring.
If necessary, replace the door ajar switch or repair any wiring issues to resolve the problem.
