The OBD code B1A73 for Chrysler indicates a fault with the Passive Entry Antenna 3 system.
Symptoms include the Engine Light being ON.
This code is commonly caused by issues like a faulty Passive Entry Antenna 3 or poor electrical connections.
While not a critical issue, it should be addressed promptly.
To fix it, inspect the wiring harness and connectors for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler b1a73 OBD Code
The specific fault code B1A73 in a Chrysler indicates a fault in the driver’s door ajar switch circuit.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible nostart condition.
- Intermittent stalling while driving.
- Engine may not crank.
Causes of the Chrysler b1a73 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for Chrysler fault code B1A73 include faulty steering column control module or wiring issues.
- B1A73 can be caused by a faulty Passive Entry Antenna 3.
- A Passive Entry Antenna 3 harness that is open or shorted.
- A Passive Entry Antenna 3 circuit with a poor electrical connection.
- A faulty Passive Entry Module (PEM).
- A faulty Radio Frequency Hub (RF Hub) Module.
Fixing Chrysler Error Code b1a73 Step By Step
Address the faulty Occupant Restraint Controller (ORC) module to resolve Chrysler B1A73 code.
- To fix the Chrysler OBDII code B1A73, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors associated with the code.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, proceed to check the sensor or module related to the code for proper operation.
- Perform any necessary repairs or replacements on the faulty sensor or module.
- Finally, clear the fault code using a diagnostic scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing Chrysler b1a73 Fault Code
The repair for Chrysler fault code B1A73 may involve replacing the passengerside seat belt retractor.
The cost to diagnose and fix the Chrysler OBD code B1A73 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the Chrysler b1a73 OBD Code
The Chrysler fault code B1A73 relates to the ambient temperature sensor circuit being open or shorted.
Chrysler OBD code B1A73 indicates a fault with the Driver Seatbelt Pretensioner 1 deployment loop.
This code is triggered by the Occupant Restraint Controller (ORC) module based on diagnostic signals received from the seatbelt pretensioner circuit.
The ORC monitors the resistance and continuity of the seatbelt pretensioner circuit to ensure proper deployment in the event of a collision.
If the circuit is open or shorted, the B1A73 code is set, indicating a fault that needs to be diagnosed and repaired to ensure the proper operation of the seatbelt pretensioner system.
Mechanic’s Tech Notes
Detailed information on Chrysler fault code B1A73, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code Chrysler B1A73, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If communication issues are detected, reprogramming or reflashing the TCM may be necessary.
Additionally, visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address the root cause of the B1A73 fault code.
FAQ
OBD code B1A73 in a Chrysler indicates an issue with the Passive Entry Antenna 3 circuit. Check for faults in the antenna, harness, or related modules.
Common symptoms of Chrysler OBD code B1A73 include Engine Light ON. Possible causes are faulty Passive Entry Antenna 3, harness issues, or faulty modules. Inspect and repair wiring connections.
Diagnose OBD code B1A73 in Chrysler: Symptoms Engine Light ON. Causes Faulty Passive Entry Antenna 3, harness issues. Fix Inspect wiring, connectors for damage or corrosion.
Wrap Up
If your Chrysler is displaying OBDII code b1a73, you may experience issues with the passenger seat belt switch.
This could be caused by a faulty seat belt switch sensor, wiring problems, or a malfunction in the restraint control module.
To address Chrysler OBDII code b1a73, start by inspecting the wiring harness and connectors related to the passenger seat belt switch.
Test the seat belt switch sensor for proper operation and consider replacing it if necessary.
Additionally, check the restraint control module for any faults that may be triggering the code.
