The OBD code B10E8 for Chrysler indicates a fault with the Blower Motor Power Module.
This affects the HVAC system.
Symptoms include the Engine Light being ON.
The issue is commonly caused by a faulty Blower Motor Power Module or related wiring issues.
It is not a severe problem.
To fix it, inspect the wiring harness and connectors for any damage or poor connections, and check the A/C Heater Control for faults.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chrysler b10e8 OBD Code
The Chrysler fault code B10E8 indicates an issue with the Occupant Restraint Controller.
- Symptoms: Service Engine Soon Warning Light ON.
- Possible nostart condition.
- Intermittent starting issues.
- Engine stalling while driving.
- Rough idle.
- Engine hesitation during acceleration.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Causes of the Chrysler b10e8 OBD Code
Possible triggers for Chrysler fault code B10E8 include issues with the Occupant Restraint Controller (ORC) module.
- B10E8 can be caused by a faulty Blower Motor Power Module.
- A Blower Motor Power Module harness that is open or shorted.
- A Blower Motor Power Module circuit with poor electrical connection.
- Or a faulty A/C Heater Control.
Fixing Chrysler Error Code b10e8 Step By Step
Address the issue by inspecting the Occupant Restraint Controller for Chrysler fault code B10E8.
- To fix the Chrysler OBDII code B10E8, start by reviewing the possible causes and visually examining the wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to reset the module that is associated with the B10E8 code.
- Perform a module reset using a diagnostic scan tool to clear the code and see if it returns.
- If the code persists after the reset, consider replacing the module if necessary.
Cost Of Fixing Chrysler b10e8 Fault Code
The repair for Chrysler fault code B10E8 may involve replacing the Occupant Restraint Controller (ORC) module.
The cost to diagnose and fix Chrysler OBD code B10E8 typically ranges from $75 to $150, based on an estimated repair time of 1. 0 hour.
Factors like shop rates and complexity of the issue can influence the final cost.
Details of the Chrysler b10e8 OBD Code
Chrysler fault code B10E8 relates to a passenger airbag deactivation indicator circuit issue.
Chrysler OBD code B10E8 means Left Rear Seatbelt Pretensioner Deployment Control Circuit High.
This code is triggered by the Occupant Restraint Controller (ORC) based on high voltage readings in the left rear seatbelt pretensioner deployment control circuit.
This circuit is part of the vehicle’s supplemental restraint system (SRS) and is responsible for deploying the seatbelt pretensioner in the event of a collision to tighten the seatbelt and reduce occupant movement.
Mechanic’s Tech Notes
This section provides detailed information on diagnosing and repairing Chrysler fault code B10E8.
To diagnose and fix OBDII code Chrysler B10E8, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.
Ensure all connections are secure.
If the issue persists, consider consulting a professional for further diagnosis and repair.
FAQ
OBD code B10E8 in a Chrysler indicates a fault with the Blower Motor Power Module. Check wiring harness, connectors, and A/C Heater Control for issues.
Diagnose a B10E8 fault code in a Chrysler by checking for a faulty Blower Motor Power Module, harness issues, or A/C Heater Control problems. Inspect wiring and connectors for damage.
Common symptoms of a B10E8 fault code in a Chrysler vehicle include the Engine Light ON and issues with the Blower Motor Power Module or A/C Heater Control.
Wrap Up
If your Chrysler is displaying OBDII code b10e8, you may experience issues with the Occupant Restraint Controller (ORC) system.
This code typically indicates a problem with the Passenger Seat Weight Sensor calibration.
Possible causes include a faulty weight sensor, wiring harness issues, or a calibration error.
To address Chrysler OBDII code b10e8, start by checking the wiring harness and connectors related to the Passenger Seat Weight Sensor.
Ensure all connections are secure and free of corrosion.
If the issue persists, consider recalibrating or replacing the weight sensor to resolve the problem effectively
