The OBD code P0107 for Chevrolet indicates a fault with the Manifold Absolute Pressure (MAP) Sensor circuit.
Symptoms include the Engine Light ON, rough idle, and engine hesitation.
Common causes are a faulty MAP Sensor, open/shorted sensor harness, or poor electrical connection.
This issue should be addressed promptly to prevent further engine performance issues.
A possible fix involves inspecting and repairing any damaged wiring or connectors related to the MAP Sensor circuit.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 6.67 (Out of 10) |
Symptoms of the Chevrolet p0107 OBD Code
The vehicle may experience rough idling, stalling, or poor acceleration with fault code P0107.
- With Chevrolet OBD code P0107, the Engine Light will be ON.
- The engine may exhibit a rough idle.
- You might experience engine hesitation.
Causes of the Chevrolet p0107 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for Chevrolet fault code P0107 include issues with the MAP sensor or its circuit.
- P0107 can be caused by a Faulty Manifold Absolute Pressure (MAP) Sensor.
- A Manifold Absolute Pressure Sensor harness that is open or shorted.
- A Manifold Absolute Pressure Sensor circuit with poor electrical connection.
- Or a Faulty Engine Control Module (ECM).
Fixing Chevrolet Error Code p0107 Step By Step
Address the issue by inspecting the MAP sensor circuit for Chevrolet fault code P0107.
- To fix a Chevrolet OBDII code p0107, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the manifold absolute pressure (MAP) sensor using a scan tool to ensure it is functioning correctly.
- If the MAP sensor is faulty, replace it with a new one.
- Clear the fault code using a scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost Of Fixing Chevrolet p0107 Fault Code
Diagnosing and repairing Chevrolet code P0107 involves testing and potentially replacing the manifold absolute pressure sensor.
The cost to diagnose and fix a Chevrolet OBD code P0107 typically ranges from $75 to $150, based on a labor time estimate of 1. 0 hour.
Factors like shop rates and complexity can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the Chevrolet p0107 OBD Code
P0107 in a Chevrolet indicates a Manifold Absolute Pressure (MAP) sensor circuit low voltage condition.
Code P0107 for Chevrolet vehicles indicates an issue with the Manifold Absolute Pressure (MAP) sensor circuit low voltage.
This means that the ECM has detected a lower than expected voltage from the MAP sensor.
The MAP sensor measures the intake manifold pressure and sends this information to the ECM to calculate engine load.
A low voltage reading can be caused by a faulty MAP sensor, damaged wiring or connectors in the MAP sensor circuit, or a problem with the ECM itself.
This code can lead to drivability issues and poor engine performance.
Mechanic’s Tech Notes
Detailed information on diagnosing and repairing Chevrolet code P0107 related to the Manifold Absolute Pressure Sensor.
OBDII code P0107 for a Chevrolet indicates an issue with the Manifold Absolute Pressure (MAP) sensor circuit low voltage.
To diagnose, use a voltmeter to check the sensor’s voltage supply and ground.
Ensure the sensor is receiving proper voltage.
Scan tools can help monitor sensor data and confirm if the sensor is functioning correctly.
Visually inspect the wiring harness and connectors for any damage, corrosion, or loose connections.
Check the connector pins for any signs of being broken or bent.
If everything looks good, consider replacing the MAP sensor itself.
FAQ
Common symptoms of OBD code P0107 in a Chevrolet: Engine Light ON, rough idle, engine hesitation. Causes: Faulty MAP Sensor, wiring issues. Fix: Inspect and repair wiring connections.
The typical cause of OBD code P0107 in a Chevrolet vehicle is a faulty Manifold Absolute Pressure (MAP) Sensor or related wiring/connection issues.
Diagnose P0107 in Chevrolet: Symptoms Engine Light ON, rough idle, hesitation. Causes Faulty MAP Sensor, wiring issues. Fix Inspect wiring, connectors for damage or corrosion.
Wrap Up
If your Chevrolet is displaying OBD code p0107 along with poor engine performance and stalling, it may be caused by a faulty Manifold Absolute Pressure (MAP) sensor, damaged wiring in the MAP sensor circuit, or a vacuum leak in the intake system.
To address Chevrolet OBD code p0107, start by checking the MAP sensor for proper operation and inspecting the wiring harness for any signs of damage or corrosion.
Ensure the vacuum lines are intact and properly connected to the intake manifold.
Replace the MAP sensor if necessary and repair any wiring issues to resolve the fault.
