The OBD code C028A for Chevrolet indicates a fault with the Hand Brake Motor.
Symptoms include the ABS warning light and engine light being illuminated.
This issue is commonly caused by a faulty hand brake motor, open/shorted harness, or poor electrical connection.
It is important to visually inspect the wiring harness and connectors for damage or corrosion and check connector pins for any issues.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chevrolet c028a OBD Code
The vehicle may exhibit issues with the ABS system due to fault code C028A.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
- Unusual noises from the ABS system.
Causes of the Chevrolet c028a OBD Code
Possible triggers for Chevrolet fault code C028A include faulty wheel speed sensor or damaged wiring.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C028A can be caused by a faulty Hand Brake Motor.
- A Hand Brake Motor harness that is open or shorted.
- A Hand Brake Motor circuit with poor electrical connection.
Fixing Chevrolet Error Code c028a Step By Step
Replace the steering angle sensor to address Chevrolet fault code C028A.
- To fix the Chevrolet OBDII code C028A, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the ABS module for proper operation.
- Consider resetting the module or replacing it if necessary.
- Conduct a thorough inspection of the wheel speed sensors and their wiring for any faults.
- Finally, clear the fault code and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing Chevrolet c028a Fault Code
The repair for fault code C028A on a Chevrolet involves diagnosing and fixing an issue with the brake pressure sensor.
The cost to diagnose and fix Chevrolet OBD code C028A is typically based on an estimated repair time of 1. 0 hour.
Labor rates range from $75 to $150 per hour, so the general cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.
Details of the Chevrolet c028a OBD Code
C028A pertains to a problem with the brake pedal position sensor circuit in Chevrolet vehicles.
OBD code C028A for Chevrolet indicates an issue with the Steering Position Sensor Circuit Range/Performance.
This code is triggered by the Body Control Module (BCM) based on abnormal signals received from the steering position sensor.
The steering position sensor is responsible for providing data on the steering wheel angle and rate of rotation to various vehicle systems, including stability control and driver assistance systems.
When the BCM detects that the signals from the steering position sensor are out of the expected range or not performing within specified parameters, it will trigger code C028A.
Mechanic’s Tech Notes
Detailed information on Chevrolet fault code C028A, including symptoms, causes, and repair procedures.
To diagnose and fix OBDII code C028A in a Chevrolet, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, focusing on broken, bent, or corroded pins.
Ensure all connections are secure.
If the issue persists, consider consulting a professional for further diagnosis and repair.
FAQ
OBD code C028A in a Chevrolet indicates an issue with the Hand Brake Motor circuit. Check for faults in the motor, harness, or electrical connections.
Common symptoms for OBD code C028A in a Chevrolet include ABS warning light on, engine light on, caused by faulty hand brake motor or related wiring issues.
Diagnose OBD code C028A in a Chevrolet: Symptoms are ABS and Engine Lights ON. Causes include faulty Hand Brake Motor. Fix: Inspect wiring harness and connectors for damage or corrosion.
Wrap Up
If your Chevrolet is displaying OBD code c028a, you may experience issues with the Electronic Brake Control Module (EBCM) pressure sensor circuit.
This could be caused by sensor malfunctions, wiring problems, or connector issues within the brake system.
To address Chevrolet OBD code c028a, start by inspecting the wiring harness and connectors related to the EBCM pressure sensor.
Check for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper functionality and replace if necessary to resolve the issue effectively.
