The OBD code C0115 for a Chevrolet indicates a fault with the Electronic Brake Control Module (EBCM).
Symptoms include the AntiLock Brake System (ABS) Warning Light and Engine Light being ON.
This issue can be caused by a faulty EBCM, open or shorted EBCM harness, or poor electrical connection.
It is crucial to visually inspect wiring harnesses and connectors for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the Chevrolet c0115 OBD Code
The Chevrolet C0115 fault code typically manifests as issues with the steering angle sensor.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Service Engine Soon Warning Light ON.
- Possible symptoms include issues with the ABS system functionality.
- Difficulty braking in certain conditions.
- Unusual noises coming from the brakes.
Causes of the Chevrolet c0115 OBD Code
Possible triggers for Chevrolet fault code C0115 include wheel speed sensor issues or wiring faults.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C0115 can be caused by a faulty Electronic Brake Control Module (EBCM).
- An open or shorted Electronic Brake Control Module (EBCM) harness.
- A poor electrical connection in the Electronic Brake Control Module (EBCM) circuit.
Fixing Chevrolet Error Code c0115 Step By Step
Resolve Chevrolet C0115 by inspecting and repairing the wheel speed sensor circuit for the left front wheel.
- To fix the Chevrolet OBDII code C0115, start by reviewing the possible causes and visually examining the wiring harness and connectors related to the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the wheel speed sensor circuits for proper operation and continuity.
- Inspect the wheel speed sensor wiring for any damage or chafing that could cause a short or open circuit.
- Replace any faulty wheel speed sensors or repair damaged wiring as necessary.
- Clear the fault codes with a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing Chevrolet c0115 Fault Code
Diagnosing and repairing fault code C0115 on a Chevrolet may involve replacing the wheel speed sensor.
The cost to diagnose and fix Chevrolet OBD code C0115 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity can affect the final cost.
Details of the Chevrolet c0115 OBD Code
C0115 pertains to a steering wheel position sensor circuit malfunction in Chevrolet vehicles.
Chevrolet OBD code C0115 means the Electronic Brake Control Module (EBCM) has detected a malfunction in the steering wheel position sensor circuit.
This code is triggered by the EBCM when it detects an issue with the signal from the steering wheel position sensor.
The steering wheel position sensor is part of the Electronic Stability Control (ESC) system and is responsible for providing steering angle information to the EBCM for stability control purposes.
Mechanic’s Tech Notes
For Chevrolet code C0115, check the steering wheel position sensor for potential issues.
To diagnose and fix OBDII code C0115 in a Chevrolet, start by visually inspecting the wiring harness and connectors related to the code.
Look for any damage or corrosion on the connector pins.
Use a multimeter to check the Transmission Control Module (TCM) power and ground.
Verify TCM communication over the Controller Area Network (CAN) using a scan tool.
If necessary, consider reprogramming the TCM.
This comprehensive approach will help identify and address issues causing the C0115 fault code.
FAQ
OBD code C0115 in a Chevrolet indicates an issue with the Electronic Brake Control Module (EBCM) circuit. Check wiring harness, connectors, and component integrity for faults.
Common symptoms of OBD code C0115 in a Chevrolet include ABS warning light on, engine light on, caused by faulty EBCM or related wiring issues.
Diagnose and repair OBD code C0115 in a Chevrolet by checking EBCM for faults. Inspect wiring harness, connectors, and pins for damage or corrosion.
Wrap Up
If your Chevrolet is displaying OBD code C0115 along with ABS warning lights, it may indicate a malfunction in the right front wheel speed sensor circuit.
This could be caused by a faulty wheel speed sensor, damaged wiring, or poor connections at the sensor or ABS module.
To address Chevrolet OBD code C0115, start by inspecting the wiring harness and connectors leading to the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
