OBD code C2200 indicates a fault in the AntiLock Brake System (ABS) Module.
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This is commonly caused by a faulty ABS Module, open/shorted harness, or poor electrical connection.
It is a serious issue that affects vehicle safety.
To fix, inspect the ABS Module, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c2200 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms for OBD code C2200 include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Braking system may feel different than usual.
- Unusual noises like grinding or scraping during braking.
- Reduced braking performance.
Causes of the c2200 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues related to fault code C2200 include ABS module failure or wiring problems.
- C2200 can be caused by a faulty AntiLock Brake System (ABS) Module.
- An open or shorted AntiLock Brake System (ABS) Module harness.
- A poor electrical connection in the AntiLock Brake System (ABS) Module circuit.
Fixing Error Code c2200 Step By Step
Resolve fault code C2200 by inspecting the ABS module for internal faults or wiring issues.
- To fix OBDII code C2200, first, review the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any damage.
- Check the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the ABS module for proper operation.
- Consider reprogramming or replacing the ABS module if necessary.
Cost Of Fixing c2200 Fault Code
The repair for fault code C2200 typically involves diagnosing and fixing issues with the ABS module.
The cost to diagnose and fix OBD code C2200 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the issue can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c2200 OBD Code
C2200 code indicates a fault in the ABS pump motor circuit.
OBD code C2200 means that there is a fault in the vehicle stability control system.
This code is triggered by the Electronic Brake Control Module (EBCM) based on data received from various sensors such as wheel speed sensors, steering angle sensor, and yaw rate sensor.
The system monitors these inputs to ensure the vehicle is stable during driving maneuvers and intervenes if necessary to help maintain control.
Mechanic’s Tech Notes
Code C2200 relates to the ABS module internal fault.
To diagnose and fix OBDII code C2200, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection will help identify and address any issues causing the C2200 fault code.
FAQ
OBD code C2200 indicates an issue with the AntiLock Brake System (ABS) Module. Check for faulty module, wiring harness issues, or poor electrical connections.
Common symptoms of OBD code C2200 include ABS warning light and engine light on. Causes may be a faulty ABS module or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code C2200 by checking for a faulty ABS module, open/shorted harness, or poor electrical connection. Inspect wiring and connectors for damage.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c2200, it may indicate a communication error between the ABS control module and the hydraulic control unit.
This could be caused by damaged wiring harnesses, faulty connectors, or a malfunctioning ABS control module.
To address OBDII code c2200, inspect the wiring harness between the ABS control module and hydraulic control unit for any signs of damage or corrosion.
Test the connectors for proper connection and continuity.
If no issues are found, consider replacing the ABS control module.
