The OBD code C200B indicates an issue with the Steering Shaft Torque Sensor 1 in the vehicle’s steering system.
Symptoms include the Engine Light being ON.
The code is usually caused by a faulty sensor, open/shorted sensor harness, or poor electrical connection.
It is important to address this issue promptly to ensure safe driving.
A possible fix involves inspecting and repairing the sensor, harness, and electrical connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c200b OBD Code
The vehicle displays a warning light indicating a communication error with the ABS control module (C200B).
- Symptoms: Service Engine Soon Warning Light may illuminate.
- Vehicle may experience a loss of power.
- Engine may run rough or misfire.
- Transmission may shift erratically.
- Vehicle may go into limp mode.
Causes of the c200b OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C200B include issues with the steering angle sensor calibration.
- C200B can be caused by a faulty Steering Shaft Torque Sensor 1.
- A Steering Shaft Torque Sensor 1 harness that is open or shorted.
- A Steering Shaft Torque Sensor 1 circuit with a poor electrical connection.
Fixing Error Code c200b Step By Step
To resolve fault code C200B, inspect and repair the wiring harness for any damage or corrosion.
- To fix OBDII code C200B, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS control module.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no issues are found with the wiring and connectors, proceed to test the ABS control module for proper operation.
- Consider reprogramming or replacing the module if necessary to resolve the C200B fault code.
Cost Of Fixing c200b Fault Code
Diagnosing and repairing fault code C200B may involve inspecting and replacing the wheel speed sensor.
The cost to diagnose and fix OBD code C200B depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
Details of the c200b OBD Code
Code C200B relates to a steering angle sensor malfunction in the vehicle’s electronic stability control system.
OBD code C200B means that the steering angle sensor has a performance issue.
This code is triggered by the steering angle sensor module based on the sensor’s readings not matching expected values.
The steering angle sensor is a crucial component in the vehicle’s stability control system, providing data on the steering wheel position to help enhance vehicle stability and traction control systems.
Mechanic’s Tech Notes
Code C200B indicates a fault with the steering angle sensor calibration in the vehicle’s electronic stability control system.
To diagnose and fix OBDII code C200B, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help identify and resolve the root cause of the C200B trouble code.
FAQ
OBD code C200B indicates an issue with the Steering Shaft Torque Sensor 1. Check sensor, harness, and connections for faults to resolve.
Common symptoms of OBD code C200B include Engine Light ON. Possible causes are faulty Steering Shaft Torque Sensor 1 or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code C200B by checking Steering Shaft Torque Sensor 1 and its harness for faults. Inspect wiring, connectors, and components for damage.
Wrap Up
If your vehicle displays OBD code c200b, you may experience issues with the steering angle sensor, such as incorrect steering angle readings or stability control malfunctions.
This code commonly indicates a fault within the steering angle sensor circuit, potentially caused by damaged wiring, a faulty sensor, or poor connections.
To address OBD code c200b, start by inspecting the wiring harness and connectors related to the steering angle sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace it if necessary to resolve the steering angle sensor circuit fault.
