OBD code C1735 indicates a CAN communication issue involving the Body Control Module (BCM) and Ignition Switch in the vehicle.
Symptoms include the Engine Light being ON.
Causes may include faulty BCM, Ignition Switch, or related wiring issues.
This code should be addressed promptly to prevent further electrical problems.
A possible fix involves inspecting and repairing any damaged wiring or connectors related to the BCM and Ignition Switch.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1735 OBD Code
The vehicle displays an issue with the front right wheel speed sensor circuit.
- Symptoms: ABS warning light may illuminate.
- Traction control system may be disabled.
- Vehicle stability control system may not function properly.
- Steering may feel heavier than usual.
- Brake pedal may feel spongy.
Causes of the c1735 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues with the steering angle sensor or its circuit can trigger fault code C1735.
- C1735 can be caused by faulty CAN communication.
- A faulty Body Control Module (BCM).
- A faulty Ignition Switch.
- An open or shorted BCM/Ignition Switch harness.
- Or a poor electrical connection in the BCM/Ignition Switch circuit.
Fixing Error Code c1735 Step By Step
Address the issue by inspecting the steering angle sensor and related wiring for faults or damage.
- To fix OBDII code C1735, first, review the possible causes related to this fault code.
- Visually inspect the wiring harness and connectors associated with the ABS module and wheel speed sensors.
- Check for any damaged components and ensure the connector pins are not broken, bent, pushed out, or corroded.
- If any issues are found during the inspection, repair or replace the damaged wiring or connectors as necessary.
- Clear the fault code using a scan tool and test drive the vehicle to verify if the issue has been resolved.
- If the code returns, further diagnostics may be required to pinpoint the exact cause of the C1735 fault code.
Cost Of Fixing c1735 Fault Code
Diagnosing and repairing fault code C1735 may involve inspecting the vehicle’s suspension system components.
The cost to diagnose and fix OBD code C1735 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The total cost depends on labor rates, shop fees, and the complexity of the repair.
Details of the c1735 OBD Code
C1735 code indicates an issue with the left rear wheel speed sensor.
OBD code C1735 means Steering Angle Sensor Malfunction.
This code is triggered by the Electronic Control Unit (ECU) when it detects a fault in the steering angle sensor.
The steering angle sensor is part of the vehicle’s stability control system and is responsible for monitoring the steering wheel position and rate of turn.
When the sensor malfunctions, it can affect the vehicle’s stability control system, potentially leading to unsafe driving conditions.
Mechanic’s Tech Notes
For fault code C1735, refer to detailed diagnostic information for troubleshooting and repair guidance.
OBDII code C1735 indicates an issue with the tire pressure monitor system.
To diagnose, check the tire pressure sensors for proper operation and battery voltage.
Use a scan tool to monitor sensor data and verify communication with the TPMS module.
Inspect wiring harnesses and connectors for damage or corrosion.
Ensure the TPMS module has power and ground by testing with a voltmeter.
If all checks out, consider reprogramming the TPMS module.
FAQ
OBD code C1735 indicates a CAN communication issue related to the Body Control Module (BCM) or Ignition Switch. Check wiring and connectors for faults.
Common symptoms of OBD code C1735 include Engine Light ON, caused by issues with CAN communication, Faulty BCM, Ignition Switch, or related wiring. Fix: Inspect and repair affected components.
Diagnose OBD code C1735 by checking CAN communication, BCM, ignition switch, and related wiring for issues. Inspect harness, connectors, and components for damage or corrosion.
Wrap Up
If your ABS warning light is illuminated and you find OBDII code c1735 stored, it may indicate a fault with the rear right wheel speed sensor circuit.
This could be caused by a damaged sensor, faulty wiring, or poor connections.
To address OBDII code c1735, begin by inspecting the rear right wheel speed sensor and its wiring harness for any visible damage.
Test the sensor’s resistance and check the connector for corrosion or loose pins.
Replace the sensor if necessary and ensure all connections are secure.
