[SOLVED] C1660 Code: Fast Fix For Receiver Rf Circuit Failure

OBD code C1660 indicates an issue with the Tire Pressure Monitoring System (TPMS) receiver.

Symptoms include the ABS and Engine warning lights being illuminated.

This is commonly caused by a faulty TPMS receiver or related wiring issues.

While not a critical problem, it can affect vehicle safety.

To fix, inspect the TPMS receiver, wiring harness, and connectors for any damage or poor connections.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!

The vehicle displays an ABS warning light on the dashboard with fault code C1660 stored.

  • Symptoms: AntiLock Brake System (ABS) Warning Light ON.
  • Engine Light ON (or Service Engine Soon Warning Light).
  • Possible loss of ABS functionality.
  • Brake pedal may feel different during braking.
  • Unusual noises from the ABS system.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for fault code C1660 include issues with the brake light switch or wiring.

  • C1660 can be caused by a faulty TPMS Receiver.
  • A TPMS Receiver harness that is open or shorted.
  • A TPMS Receiver circuit with poor electrical connection.

To address fault code C1660, inspect the ABS module for potential internal faults or wiring issues.

  • To fix OBDII code C1660, first, review the possible causes related to this code.
  • Visually examine the wiring harness and connectors associated with the ABS module.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • If no visible issues are found, perform a reset of the ABS module using a professional diagnostic scan tool.
  • Test drive the vehicle to see if the code returns.
  • If the code persists, consider replacing the ABS module with a new or remanufactured unit.

Diagnosing and repairing fault code C1660 may involve inspecting and replacing the ABS pump motor relay.

The cost to diagnose and fix OBD code C1660 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.

Code C1660 relates to a malfunction in the vehicle’s electronic power steering system.

OBD code C1660 indicates a fault with the cruise control brake switch circuit.

This code is triggered by the ECM (Engine Control Module) when it detects an electrical fault in the cruise control brake switch circuit.

The cruise control brake switch is a component that informs the ECM when the brake pedal is pressed, allowing the ECM to disengage the cruise control system.

When the ECM detects a fault in this circuit, it sets code C1660 to alert the technician of the issue.

Code C1660 indicates a fault in the vehicle’s brake light switch circuit.

OBDII code C1660 indicates a fault with the transmission control module (TCM) power supply.

To diagnose this issue, use a multimeter to check the TCM’s power and ground connections for proper voltage and continuity.

Additionally, utilize a scan tool to confirm if the TCM communicates over the Controller Area Network (CAN) network.

Visually inspect the wiring harness and connectors for any damage, and ensure that connector pins are not broken, bent, pushed out, or corroded.

If necessary, consider reprogramming or reflashing the TCM to address the fault.

1. What does OBD code C1660 mean in a vehicle?

OBD code C1660 indicates an issue with the Tire Pressure Monitoring System (TPMS) receiver. Check for faulty receiver, wiring issues, or poor connections. Inspect and repair as needed.

2. What are the common symptoms associated with OBD code C1660?

Common symptoms for OBD code C1660 include ABS warning light on, engine light on. Causes may be faulty TPMS receiver or related wiring issues. Fix: Inspect and repair wiring connections.

3. How can I diagnose and repair OBD code C1660 in my vehicle?

Diagnose OBD code C1660 by checking TPMS Receiver and harness for faults. Inspect wiring and connectors for damage, corrosion, or poor connections.

 c1660 error fault code explained

If your ABS warning light is illuminated and you retrieve OBDII code c1660, it may indicate a fault in the stop lamp switch circuit.

This could be caused by a faulty stop lamp switch, damaged wiring, or poor electrical connections.

To address OBDII code c1660, start by inspecting the stop lamp switch and its wiring harness for any visible damage.

Test the switch for proper operation and ensure all electrical connectors are securely attached.

Replace the stop lamp switch if necessary and repair any damaged wiring to resolve the issue.

Scroll to Top