OBD code C1532 indicates an issue with the Power Steering Electronic Control Unit (ECU).
Symptoms include the AntiLock Brake System (ABS) and Engine warning lights being illuminated.
This code is caused by a faulty Power Steering ECU, open/shorted ECU harness, or poor electrical connection.
It is a moderate issue.
To fix, inspect the wiring harness and connectors for damage, and check connector pins for any issues.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1532 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C1532 stored.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises from the ABS system.
- Brake pedal may feel different than usual.
Causes of the c1532 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1532 include issues with the steering angle sensor or related wiring.
- C1532 can be caused by a faulty Power Steering ECU.
- A Power Steering ECU harness that is open or shorted.
- A Power Steering ECU circuit with a poor electrical connection.
Fixing Error Code c1532 Step By Step
To resolve fault code C1532, inspect the steering angle sensor and related wiring for faults.
- To fix OBDII code C1532, first, review the possible causes related to this fault code.
- Visually examine the wiring harness and connectors associated with the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Ensure all connections are secure and free of corrosion.
- Test the ABS module for proper operation and communication.
- Reset the ABS module if necessary.
- Consider replacing the ABS module if all other steps do not resolve the issue.
Cost Of Fixing c1532 Fault Code
Diagnosing and repairing fault code C1532 may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code C1532 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1532 OBD Code
Code C1532 indicates an issue with the brake pedal switch circuit in the vehicle.
OBD code C1532 indicates a fault with the left front wheel speed sensor circuit.
This code is triggered by the ABS module when it detects an issue with the signal coming from the left front wheel speed sensor.
The wheel speed sensor is responsible for monitoring the speed of the wheel and providing this information to the ABS module for proper antilock brake system operation.
When the ABS module detects a problem with the signal from the left front wheel speed sensor, it will trigger the C1532 fault code.
Mechanic’s Tech Notes
Code C1532 indicates a fault in the brake pedal switch circuit.
To diagnose and fix OBDII code C1532, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This thorough inspection can help identify and address the root cause of the issue related to code C1532.
FAQ
OBD code C1532 indicates a fault in the Power Steering Electronic Control Unit (ECU) system. Check for wiring issues and inspect connectors for damage.
Common symptoms for OBD code C1532 include ABS warning light and engine light on. Causes may be faulty power steering ECU or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose and repair OBD code C1532 by checking the Power Steering ECU, harness, and connections for faults. Look for damaged components or corroded pins.
Wrap Up
If your ABS warning light is on and you see OBDII code c1532, it may indicate an issue with the right front wheel speed sensor circuit.
This could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor connection at the sensor or module.
To address OBDII code c1532, start by inspecting the wiring and connector at the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor for proper operation and replace if necessary.
