OBD code C1524 indicates an issue with the Power Steering Motor Assembly in the vehicle’s AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
This is commonly caused by a faulty power steering motor assembly or related wiring issues.
While not a critical issue, it should be addressed promptly to avoid potential safety concerns.
A possible fix involves inspecting the wiring harness and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1524 OBD Code
The vehicle displays a warning light indicating a fault with the ABS system (C1524).
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different than usual.
- Unusual noises coming from the ABS system.
Causes of the c1524 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
C1524 code typically indicates a fault in the brake pedal switch circuit.
- C1524 can be caused by a Faulty Power Steering Motor Assembly.
- A Power Steering Motor Assembly harness that is open or shorted.
- A Power Steering Motor Assembly circuit with poor electrical connection.
- A Faulty Power Steering ECU.
Fixing Error Code c1524 Step By Step
Address the faulty wheel speed sensor to resolve fault code C1524.
- To fix OBDII code C1524, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensors for proper operation and connection.
- Inspect the ABS module for any signs of damage or corrosion.
- Test the ABS module power and ground circuits for proper voltage and continuity.
- Finally, reprogram or replace the ABS module if necessary to resolve the C1524 fault code.
Cost Of Fixing c1524 Fault Code
Diagnosing and repairing fault code C1524 may involve inspecting and replacing faulty wheel speed sensors.
The cost to diagnose and fix OBD code C1524 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour.
The total cost will vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1524 OBD Code
C1524 indicates an issue with the brake pedal switch circuit in the vehicle’s ABS system.
OBD code C1524 means Vehicle Speed Sensor Circuit Low.
This code is triggered when the Body Control Module (BCM) detects a low voltage signal from the vehicle speed sensor circuit.
The vehicle speed sensor is responsible for monitoring the speed of the vehicle and providing this information to various control modules within the vehicle for proper operation of systems such as the speedometer, cruise control, and ABS.
When the BCM detects a low voltage signal from the vehicle speed sensor circuit, it sets code C1524 to indicate a potential issue with the vehicle speed sensor or its circuit.
Mechanic’s Tech Notes
Code C1524 indicates an issue with the brake pedal switch circuit in the vehicle’s brake system.
OBDII code C1524 typically indicates a communication error between the transmission control module (TCM) and the body control module (BCM).
To diagnose this, you can use a voltmeter to check TCM power and ground connections for proper voltage levels.
Additionally, a scan tool can be used to confirm if the TCM is communicating over the Controller Area Network (CAN) network.
If the wiring harness and connectors look good, reflashing the TCM software may be necessary to resolve the issue.
FAQ
OBD code C1524 indicates an issue with the Power Steering Motor Assembly in the vehicle, leading to ABS and Engine warning lights. Check related components and wiring for faults.
Common symptoms for OBD code C1524 include ABS warning light on, engine light on. Causes may be faulty power steering motor assembly or related wiring issues. Fix: Inspect and repair affected components.
Diagnose OBD code C1524 by checking Power Steering Motor Assembly, harness, and connectors for faults. Repair as needed to resolve ABS and Engine Light issues.
Wrap Up
If your ABS warning light is on and you see OBDII code c1524, it may indicate a fault with the brake pressure sensor circuit in the ABS module.
This could be caused by a damaged sensor, wiring issue, or a faulty ABS module.
To address OBDII code c1524, start by inspecting the wiring harness and connectors related to the brake pressure sensor.
Check for any visible damage, corrosion, or loose connections.
If no issues are found, consider testing the brake pressure sensor itself for proper operation.
