[SOLVED] C1460 Code: Quick Fix For Accelerometer Power Circuit

OBD code C1460 indicates an issue with the Vehicle Accelerometer in the AntiLock Brake System (ABS).

Symptoms include the ABS warning light and engine light being illuminated.

This can be caused by a faulty accelerometer, open/shorted harness, or poor electrical connection.

It’s a moderate issue.

To fix, inspect the wiring harness, connectors, and components for damage or corrosion.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

The vehicle displays a warning light indicating a fault with the electronic stability control system.

  • When OBD code C1460 occurs, you may notice the AntiLock Brake System (ABS) Warning Light ON.
  • The Engine Light may also be illuminated (or Service Engine Soon Warning Light).
  • The vehicle may experience issues with the ABS system functionality.
  • Braking performance may be affected.
  • The ABS system may not engage properly during sudden stops.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for fault code C1460 include issues with the brake light switch or wiring.

  • C1460 can be caused by a faulty Vehicle Accelerometer.
  • A Vehicle Accelerometer harness that is open or shorted.
  • A Vehicle Accelerometer circuit with poor electrical connection.

Resolve fault code C1460 by inspecting and repairing the steering angle sensor circuit as needed.

  • To fix OBDII code C1460, first, review the possible causes related to this code.
  • Visually examine the wiring harness and connectors associated with the ABS system.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Ensure all connections are secure and free of corrosion.
  • If no issues are found with the wiring and connectors, consider resetting the ABS module to clear the code.
  • If the problem persists after resetting, the ABS module may need to be replaced with a new or remanufactured unit.

Diagnosing and repairing fault code C1460 may involve inspecting and replacing the steering angle sensor.

The cost to diagnose and fix OBD code C1460 depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can influence the final cost.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Code C1460 relates to an issue with the brake booster pressure sensor circuit.

OBD code C1460 indicates an issue with the brake pedal switch circuit.

This code is triggered by the Electronic Brake Control Module (EBCM) when it detects a fault in the brake pedal switch circuit.

The brake pedal switch is a component that sends a signal to the EBCM when the brake pedal is pressed, allowing the ABS system to function properly.

When this circuit malfunctions, it can affect the operation of the ABS system and potentially compromise vehicle safety.

Code C1460 relates to an issue with the brake pressure sensor circuit in the vehicle’s ABS system.

OBDII code C1460 relates to a communication error between the transmission control module (TCM) and the body control module (BCM).

To diagnose, check TCM power and ground using a multimeter.

Use a scan tool to confirm TCM response over the CAN network.

Visually inspect wiring harnesses and connectors for damage, focusing on pin condition.

If no visible issues, consider TCM reprogramming.

Reflashing the TCM may resolve the communication fault.

1. What does OBD code C1460 mean in a vehicle?

OBD code C1460 indicates an issue with the Vehicle Accelerometer in the AntiLock Brake System. Check for faults in the accelerometer, harness, or connections.

2. What are the common symptoms associated with OBD code C1460?

Common symptoms for OBD code C1460 include ABS warning light on, engine light on. Causes may be faulty vehicle accelerometer or related wiring issues. Fix: Inspect and repair wiring connections.

3. How can I diagnose and fix OBD code C1460 in my vehicle?

Diagnose OBD code C1460 by checking the Vehicle Accelerometer and its wiring for faults. Inspect connectors for damage or corrosion. Fix as needed.

 c1460 error fault code explained

If your ABS warning light is illuminated and you retrieve OBDII code c1460, it may indicate a fault with the brake pressure sensor circuit in the ABS system.

This could be caused by a damaged sensor, wiring issue, or a poor connection at the sensor or module.

To address OBDII code c1460, start by inspecting the wiring harness and connectors related to the brake pressure sensor.

Look for any signs of damage, corrosion, or loose connections.

Test the sensor itself for proper operation and replace if necessary to resolve the issue.

Scroll to Top