The OBD code C1360 indicates an issue with the Master Cylinder Pressure Sensor in the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
This is usually caused by a faulty sensor, wiring harness issues, or poor electrical connections.
It is a moderate issue that should be addressed promptly.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1360 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C1360 stored.
- Symptoms for OBD code C1360 may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Strange noises coming from the ABS system.
- Braking performance may feel different than usual.
- The vehicle may exhibit unstable behavior during braking.
Causes of the c1360 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1360 include issues with the brake control relay and related circuits.
- C1360 can be caused by a faulty Master Cylinder Pressure Sensor.
- A Master Cylinder Pressure Sensor harness that is open or shorted.
- A Master Cylinder Pressure Sensor circuit with poor electrical connection.
Fixing Error Code c1360 Step By Step
Resolve fault code C1360 by inspecting the steering angle sensor for proper calibration and functionality.
- To fix OBDII code C1360, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the condition of the wheel speed sensor wiring and connections.
- Test the wheel speed sensors for proper operation and resistance values.
- Inspect the ABS control module for any signs of damage or corrosion.
- Finally, reset the ABS module and clear the fault codes using a diagnostic scan tool.
- If the issue persists, consider replacing the faulty wheel speed sensor or ABS control module as needed.
Cost Of Fixing c1360 Fault Code
Diagnosing and repairing fault code C1360 may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code C1360 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
Details of the c1360 OBD Code
C1360 indicates a malfunction in the vehicle’s brake pressure sensor circuit.
OBD code C1360 means that there is a fault in the traction control system pressure circuit.
This code is triggered by the ABS module when it detects an issue with the pressure sensor or circuit related to the traction control system.
The ABS module monitors the pressure in the system to ensure proper operation of the traction control system, and when it detects a fault in the pressure circuit, it sets code C1360.
Mechanic’s Tech Notes
Code C1360 indicates a malfunction in the vehicle’s traction control system.
OBDII code C1360 typically indicates a fault with the traction control system.
To diagnose this, start by checking the power and ground to the traction control module (TCM) using a voltmeter.
Ensure the TCM communicates over the Controller Area Network (CAN) by using a scan tool.
If the wiring harness and connectors look good, consider reprogramming the TCM.
Additionally, inspect the wheel speed sensors and their wiring for any issues.
If no visible problems are found, it may be necessary to replace the TCM.
FAQ
OBD code C1360 indicates an issue with the Master Cylinder Pressure Sensor in the AntiLock Brake System. Check sensor, harness, and connections for faults.
Common symptoms for OBD code C1360 include ABS warning light and engine light on. Causes may be faulty master cylinder pressure sensor or related wiring issues. Fix: Inspect sensor and wiring.
Diagnose and repair OBD code C1360 by checking the Master Cylinder Pressure Sensor and its wiring for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c1360, it may indicate a fault with the brake pressure sensor circuit in the ABS system.
This could be caused by a damaged sensor, faulty wiring connections, or a problem with the sensor itself.
To address OBDII code c1360, start by inspecting the wiring harness and connectors related to the brake pressure sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor for proper operation and replace it if necessary to resolve the issue.
