OBD code C1353 indicates a fault in the Skid Control Electronic Control Unit (ECU) circuit.
Symptoms include the AntiLock Brake System (ABS) and Engine warning lights being illuminated.
This issue is commonly caused by a faulty Brake Actuator Assembly or Skid Control ECU, open/shorted harness, or poor electrical connection.
It is crucial to visually inspect wiring harnesses, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1353 OBD Code
The vehicle displays a warning light indicating a malfunction related to fault code C1353.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
- Unusual noises from the ABS system.
Causes of the c1353 OBD Code
Possible triggers for fault code C1353 include issues with the ABS pump motor circuit.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C1353 can be caused by a faulty Brake Actuator Assembly.
- A faulty Skid Control Electronic Control Unit (ECU).
- An open or shorted Skid Control ECU harness.
- A poor electrical connection in the Skid Control ECU circuit.
Fixing Error Code c1353 Step By Step
Resolve fault code C1353 by inspecting the ABS pump motor circuit for possible wiring issues.
- To fix OBDII code C1353, first, review the possible causes related to this fault code.
- Visually inspect the wiring harness and connectors associated with the ABS system.
- Check for any damaged components or wiring issues.
- Inspect the connector pins for any signs of being broken, bent, pushed out, or corroded.
- Address any wiring or connector issues found during the inspection.
- Reset the ABS module to clear the code and see if it returns.
- If the code persists, consider replacing the ABS module if no other faults are found.
Cost Of Fixing c1353 Fault Code
Diagnosing and repairing fault code C1353 may involve inspecting and replacing the ABS pump motor circuit.
The cost to diagnose and fix OBD code C1353 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the c1353 OBD Code
Code C1353 relates to an ABS wheel speed sensor circuit malfunction in a vehicle.
OBD code C1353 means that a malfunction has been detected in the ABS outlet valve coil RF circuit.
This code is triggered by the ABS control module when it detects an issue with the outlet valve coil RF circuit in the antilock braking system.
The outlet valve coil RF circuit is part of the ABS system responsible for controlling the hydraulic pressure to the right front wheel during braking to prevent wheel lockup.
Mechanic’s Tech Notes
Code C1353 indicates a malfunction in the ABS pump motor circuit.
OBDII code C1353 relates to a fault in the traction control system.
To diagnose, check the TCM power and ground using a multimeter.
Verify TCM communication over the CAN network with a scan tool.
Inspect wiring harnesses and connectors for damage, and check connector pins for issues like corrosion or bending.
Reflashing the TCM might be necessary.
If the issue persists, consider testing the wheel speed sensors and related components for faults.
FAQ
OBD code C1353 indicates a fault in the Skid Control Electronic Control Unit (ECU) circuit. Check for wiring issues and inspect connectors for damage or corrosion.
Common symptoms of OBD code C1353 include ABS warning light and engine light on. Possible causes are faulty brake actuator assembly or Skid Control ECU issues. Fix: Inspect wiring and connectors.
Diagnose OBD code C1353 by checking for faulty brake actuator assembly, Skid Control ECU issues, or wiring problems. Inspect and repair damaged components or connectors.
Wrap Up
If your ABS warning light is on and you see OBDII code c1353, it may indicate a fault with the ABS motor relay circuit in the AntiLock Brake System.
This could be caused by a malfunctioning ABS motor relay, damaged wiring, or poor electrical connections.
To address OBDII code c1353, start by checking the ABS motor relay and its connections for any signs of damage or corrosion.
Inspect the wiring harness for any visible issues such as fraying or breaks.
Ensure all connectors are securely attached and free of debris or corrosion.
If necessary, replace the ABS
