OBD code C1336 indicates an issue with the Acceleration Sensor Calibration in the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being ON.
Causes may include faulty sensors or poor electrical connections.
This is a serious issue as it affects the vehicle’s braking system.
To fix, inspect and repair the sensors, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1336 OBD Code
The vehicle may experience issues with the engine speed sensor circuit, leading to code C1336.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of traction control functionality.
- Brake pedal may feel different during braking.
Causes of the c1336 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues related to fault code C1336 include ABS sensor malfunction or wiring problems.
- C1336 can be caused by incorrect Acceleration Sensor Calibration.
- Improper Sensor installation.
- A Faulty Yaw Rate Sensor and Acceleration Sensor (Airbag Sensor Assembly).
- An open or shorted Airbag Sensor Assembly harness.
- A poor electrical connection in the Airbag Sensor Assembly circuit.
- Or a Faulty Skid Control ECU (Brake Actuator Assembly).
Fixing Error Code c1336 Step By Step
Resolve fault code C1336 by inspecting and repairing the engine’s crankshaft position sensor circuit.
- To fix OBDII code C1336, first, review the possible causes related to this fault code.
- Visually inspect the wiring harness and connectors associated with the ABS system.
- Check for any damaged components or signs of wear.
- Inspect the connector pins for any issues like being broken, bent, pushed out, or corroded.
- Repair or replace any damaged wiring or connectors as necessary.
- Clear the fault code from the vehicle’s computer using a scan tool.
- Test drive the vehicle to verify if the issue has been resolved.
Cost Of Fixing c1336 Fault Code
Diagnosing and repairing fault code C1336 typically involves inspecting and testing the ABS system components.
The cost to diagnose and fix OBD code C1336 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The total cost depends on labor rates, shop fees, and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1336 OBD Code
C1336 indicates a problem with the engine’s crankshaft position sensor circuit.
OBD code C1336 means Zero Point Calibration of Yaw Rate Sensor Undone.
This code is triggered by the ECM (Engine Control Module) when it detects that the zero point calibration of the yaw rate sensor has not been performed or is incomplete.
The yaw rate sensor is part of the vehicle’s stability control system and is responsible for measuring the vehicle’s rotation around its vertical axis.
Proper calibration of this sensor is crucial for the accurate operation of the vehicle’s stability control system.
Mechanic’s Tech Notes
C1336 indicates a problem with the engine’s crankshaft position sensor circuit.
OBDII code C1336 typically indicates an issue with the crankshaft position sensor circuit.
To diagnose, use a voltmeter to check the sensor’s power and ground.
Inspect the wiring harness and connectors for any damage, corrosion, or loose connections.
Verify the sensor’s signal using a scan tool to ensure proper communication over the CAN network.
If all checks out, consider reprogramming the TCM as a potential fix.
FAQ
OBD code C1336 indicates a fault in the Acceleration Sensor Calibration or related components. Check wiring, connectors, and sensor installation for issues.
Symptoms of C1336: ABS Warning Light ON, Engine Light ON. Causes: Acceleration Sensor Calibration, Faulty Yaw Rate Sensor. Fix: Inspect wiring, connectors for damage.
Diagnose C1336 by checking Acceleration Sensor Calibration, Sensor installation, Yaw Rate Sensor, Airbag Sensor Assembly, and Skid Control ECU. Inspect wiring for damage or poor connections.
Wrap Up
If your ABS warning light is on and you see OBDII code C1336, it may indicate a faulty engine speed sensor, damaged wiring harness, or poor electrical connection in the engine speed sensor circuit.
To address OBDII code C1336, check the engine speed sensor for proper operation, inspect the wiring harness for any visible damage, and ensure secure electrical connections at the sensor and ECU terminals.
Consider replacing the engine speed sensor if necessary.
