OBD code C1310 indicates a fault in the Hybrid Control System, affecting the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
The issue is typically caused by a faulty Hybrid Control ECU.
This is a serious problem that requires immediate attention.
To fix it, inspect the wiring harness, connectors, and component for any damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1310 OBD Code
The vehicle may experience issues with the ABS system due to fault code C1310.
- With OBD code C1310, symptoms may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Braking performance may feel abnormal.
- Unusual noises like grinding or scraping during braking.
- The vehicle may exhibit longer stopping distances.
Causes of the c1310 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1310 include ABS pump motor circuit malfunction.
- C1310 can be caused by a faulty Hybrid Control System.
- A malfunctioning Hybrid Control ECU.
Fixing Error Code c1310 Step By Step
Address the ABS hydraulic pump motor circuit malfunction indicated by fault code C1310.
- To fix OBDII code C1310, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensors for proper operation and connection.
- Inspect the ABS control module for any signs of damage or corrosion.
- Test the ABS system for any faults and perform a reset if necessary.
- Finally, if all checks pass and the issue persists, consider replacing the ABS control module with a new one.
Cost Of Fixing c1310 Fault Code
Diagnosing and repairing fault code C1310 may involve inspecting the ABS hydraulic pump motor circuit.
The cost to diagnose and fix OBD code C1310 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates, complexity of the issue, and any additional parts needed for the repair.
Details of the c1310 OBD Code
C1310 code indicates a malfunction in the pump motor circuit of the ABS system.
OBD code C1310 indicates a malfunction in the ABS hydraulic pump motor circuit.
This code is triggered by the ABS control module when it detects an issue with the hydraulic pump motor circuit.
The ABS system is involved in this case, specifically the hydraulic pump motor circuit responsible for controlling brake pressure during ABS operation.
Mechanic’s Tech Notes
Code C1310 indicates a malfunction in the power supply to the brake booster pressure sensor.
OBDII code C1310 relates to the ABS hydraulic pump motor circuit.
To diagnose, use a multimeter to check power and ground to the ABS module.
Verify communication between the ABS module and other control modules using a scan tool over the CAN network.
Visually inspect wiring harnesses and connectors for damage, corrosion, or loose connections.
Ensure connector pins are intact.
If no visible issues are found, the problem may lie within the ABS module itself, requiring further testing or potential replacement.
Reflashing the module could also be necessary to resolve the fault.
FAQ
OBD code C1310 indicates a fault in the Hybrid Control System. Symptoms include ABS and Engine warning lights. Check wiring, connectors, and Hybrid Control ECU for issues.
Common symptoms for OBD code C1310 include ABS warning light on, engine light on, caused by issues with the hybrid control system. Fix: Check wiring and connectors for damage.
Diagnose OBD code C1310 by checking Hybrid Control System and Hybrid Control ECU. Inspect wiring harness, connectors, and pins for damage or corrosion.
Wrap Up
If your ABS warning light is on and you see OBDII code c1310, it may indicate a malfunction in the pump motor circuit of the ABS system.
This could be caused by a faulty ABS pump motor, damaged wiring harness, or poor electrical connections.
To address OBDII code c1310, check the wiring harness for any signs of damage or corrosion.
Test the connectors for proper connection and continuity.
If no issues are found, consider replacing the ABS pump motor to resolve the problem effectively.
