The OBD code C1307 indicates an issue with the Steering Angle Sensor (SAS).
Symptoms include the ABS and Engine warning lights being illuminated.
Causes may include improper sensor installation, a faulty sensor, open/shorted harness, or poor electrical connection.
This is a serious issue as it affects the vehicle’s stability control system.
To fix, inspect the sensor, wiring, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1307 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms for OBD code C1307 may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises coming from the ABS system.
- Inconsistent brake performance.
- Jerky or pulsating brake pedal feel.
Causes of the c1307 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
C1307 code typically indicates an issue with the brake booster vacuum sensor circuit.
- C1307 can be caused by improper installation or positioning of the steering angle sensor.
- Faulty Steering Angle Sensor.
- Steering Angle Sensor harness is open or shorted.
- Steering Angle Sensor circuit poor electrical connection.
Fixing Error Code c1307 Step By Step
Resolve fault code C1307 by inspecting the ABS pump motor circuit for potential issues.
- To fix OBDII code C1307, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensor wiring and connections for any issues.
- Test the wheel speed sensors for proper operation using a scan tool.
- Inspect the wheel speed sensor reluctor rings for damage or missing teeth.
- Replace any faulty wheel speed sensors or reluctor rings.
- Clear the fault codes and test drive the vehicle to verify the repair.
- If the code returns, further diagnosis of the ABS system may be necessary, including checking the ABS module and hydraulic unit for faults.
Cost Of Fixing c1307 Fault Code
Diagnosing and repairing fault code C1307 may involve inspecting and servicing the vehicle’s brake system components.
The cost to diagnose and fix OBD code C1307 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates, complexity of the issue, and any additional parts needed for the repair.
Details of the c1307 OBD Code
C1307 indicates a malfunction in the brake booster pressure sensor circuit.
OBD code C1307 means that the brake booster vacuum sensor has detected a low voltage condition.
This code is triggered by the brake booster vacuum sensor itself when it sends a signal to the ABS module indicating a voltage below the specified threshold.
The brake booster vacuum sensor is a crucial component in the brake system, as it helps the ABS module monitor the vacuum levels for proper brake operation.
Mechanic’s Tech Notes
Code C1307 indicates a malfunction in the brake booster pressure sensor circuit.
To diagnose and fix OBDII code C1307, start by checking the Transmission Control Module (TCM) power and ground using a multimeter.
Verify TCM communication over the Controller Area Network (CAN) network with a scan tool.
If the TCM does not respond, reprogramming or reflashing may be necessary.
Visually inspect the wiring harness and connectors for any damage, and check connector pins for signs of being broken, bent, pushed out, or corroded.
This can help identify any issues with the TCM circuitry that may be causing the fault code.
FAQ
OBD code C1307 indicates an issue with the Steering Angle Sensor. Symptoms include ABS and Engine warning lights. Check sensor installation, wiring, and connections for faults.
Common symptoms of OBD code C1307 include ABS warning light and engine light on. Causes may be faulty steering angle sensor or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code C1307 by checking steering angle sensor installation, sensor condition, and wiring harness for faults. Inspect connectors for damage or corrosion.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c1307, it may indicate a fault with the right front wheel speed sensor circuit.
This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a corroded sensor connector.
To address OBDII code c1307, begin by inspecting the wiring harness and connectors related to the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary.
