The OBD code C1288 indicates a fault in the Steering Wheel Position Sensor (SWPS) circuit of the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
Causes may include a faulty SWPS, Electronic Brake Control Module (EBCM), or related wiring issues.
This issue should be addressed promptly to ensure safe braking operation.
A possible fix involves inspecting and repairing the SWPS circuit and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1288 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different than usual.
- Unusual noises coming from the ABS system.
Causes of the c1288 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
C1288 code typically indicates a fault in the brake pressure sensor circuit.
- C1288 can be caused by a faulty Steering Wheel Position Sensor (SWPS).
- A faulty Electronic Brake Control Module (EBCM).
- An open or shorted Steering Wheel Position Sensor (SWPS) harness.
- A poor electrical connection in the Steering Wheel Position Sensor (SWPS) circuit.
Fixing Error Code c1288 Step By Step
Inspect the brake pressure sensor circuit for fault code C1288.
- To fix OBDII code C1288, start by reviewing the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any issues.
- Check for damaged components and inspect the connector pins for signs of damage.
- Test the wheel speed sensor for proper operation and replace if necessary.
- Clear the fault codes and perform a test drive to verify the repair.
- If the issue persists, consider resetting the ABS module or performing a software update.
Cost Of Fixing c1288 Fault Code
Diagnosing and repairing fault code C1288 typically involves inspecting and servicing the ABS pump motor circuit.
The cost to diagnose and fix OBD code C1288 typically ranges from $75 to $150, with an estimated repair time of 1. 0 hour.
The total cost depends on labor rates, shop fees, and the complexity of the issue.
Details of the c1288 OBD Code
C1288 indicates a fault in the steering angle sensor circuit on Ford vehicles.
OBD code C1288 means there is a fault in the steering sensor circuit.
This code is triggered by the ABS module based on input signals from the steering angle sensor.
The steering angle sensor is a critical component of the vehicle’s stability control system, providing data on the steering wheel angle to help the ABS module make decisions regarding vehicle stability and traction control.
Mechanic’s Tech Notes
Code C1288 indicates a fault in the steering angle sensor circuit.
OBDII code C1288 relates to the ABS/TCS system.
To diagnose, check the TCM power and ground using a multimeter.
Verify TCM communication over the CAN network with a scan tool.
Inspect wiring harnesses and connectors for damage, corrosion, or loose connections.
Ensure connector pins are intact.
Reflashing the TCM might be necessary.
This code often indicates issues with the transmission control module or its communication network.
FAQ
OBD code C1288 indicates an issue with the Steering Wheel Position Sensor (SWPS) in the AntiLock Brake System (ABS). Check sensor, wiring, and connectors for faults.
Common symptoms for OBD code C1288 include ABS warning light on, engine light on, caused by faulty SWPS or EBCM. Fix: Inspect wiring and connectors for damage.
Diagnose and fix OBD code C1288 by checking the Steering Wheel Position Sensor (SWPS), EBCM, and related wiring for faults. Inspect connectors and wiring for damage or poor connections.
Wrap Up
If your ABS warning light is on and you see OBDII code c1288, it may indicate an issue with the steering angle sensor circuit.
This could be caused by a faulty steering angle sensor, damaged wiring, or poor connections.
To address OBDII code c1288, check the wiring harness for any signs of damage or corrosion.
Inspect the connectors for a secure fit and proper contact.
Consider replacing the steering angle sensor if necessary to resolve the problem.
