OBD code C1241 indicates a malfunction in the Skid Control ECU (Brake Actuator Assembly) in the AntiLock Brake System (ABS).
Symptoms include the ABS warning light and engine light being illuminated.
Causes may include low battery charge, faulty battery, charging system issues, or a faulty Skid Control ECU.
This issue is serious as it affects braking performance.
To fix, inspect wiring harness, connectors, and components for damage or corrosion.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1241 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- With OBD code C1241, symptoms may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Braking performance may feel abnormal.
- Unusual noises like grinding or scraping during braking.
- The vehicle may exhibit longer stopping distances.
Causes of the c1241 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues with the ABS system or brake actuator assembly may trigger fault code C1241.
- C1241 can be caused by low battery charge.
- A faulty battery.
- A faulty charging system.
- A faulty Skid Control ECU (Brake Actuator Assembly).
Fixing Error Code c1241 Step By Step
Address the issue by inspecting the brake fluid level and ABS system components for code C1241.
- To fix OBDII code C1241, first, review the possible causes related to the code.
- Visually examine the wiring harness and connectors associated with the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Ensure all connections are secure and free of corrosion.
- Test the ABS sensors for proper operation and signal output.
- Reset the ABS module using a scan tool if necessary.
- Replace the ABS module if all other steps do not resolve the issue.
Cost Of Fixing c1241 Fault Code
Diagnosing and repairing fault code C1241 typically involves inspecting and servicing the ABS system.
The cost to diagnose and fix OBD code C1241 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the c1241 OBD Code
C1241 indicates a problem with the ABS system’s pump motor circuit.
OBD code C1241 means the ABS system has detected a problem with the low tire pressure.
It is triggered by the ABS control module based on input signals from the tire pressure monitoring system (TPMS) sensors.
Mechanic’s Tech Notes
Code C1241 indicates a problem with the ABS system’s pump motor relay circuit.
OBDII code C1241 relates to the malfunction of the ABS/TCS system.
To diagnose, check the ABS/TCS module power and ground using a voltmeter.
Use a scan tool to communicate with the module and verify its response over the CAN network.
Inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
Reflash the module if necessary.
This process will help pinpoint the issue and guide you towards a successful repair.
FAQ
OBD code C1241 indicates a fault in the ABS system. Symptoms include ABS and engine warning lights. Causes may be low battery charge or faulty components.
Common symptoms for OBD code C1241 include ABS warning light on, engine light on, caused by low battery charge, faulty battery, charging system, or brake actuator assembly.
Diagnose and repair OBD code C1241 by checking for low battery charge, faulty battery, charging system, or Skid Control ECU. Inspect wiring harness and connectors for damage.
Wrap Up
If your ABS warning light is on and you see OBDII code C1241, it may indicate a problem with the low tire pressure warning system.
This could be caused by faulty tire pressure sensors, wiring issues, low tire pressure, or a malfunctioning tire pressure monitoring system module.
To address OBDII code C1241, start by checking the tire pressure in all tires to ensure they are properly inflated.
Inspect the tire pressure sensors for damage or corrosion, and test the wiring harness and connectors for any faults.
Replace any faulty sensors or repair any damaged wiring as needed.
