OBD code C1214 indicates a fault in the Electronic Brake Control Module (EBCM) system.
Symptoms include the AntiLock Brake System (ABS) Warning Light and Engine Light being ON.
Causes may include a faulty EBCM, open/shorted EBCM harness, or poor electrical connection.
This issue is serious as it affects braking performance.
A possible fix is to inspect and repair any damaged wiring or connectors related to the EBCM.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1214 OBD Code
The vehicle displays an illuminated ABS warning light on the dashboard.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel spongy or pulsate during braking.
- Difficulty maintaining control during sudden stops.
Causes of the c1214 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1214 include issues with the ABS pump motor or its circuit.
- C1214 can be caused by a faulty Electronic Brake Control Module (EBCM).
- An open or shorted Electronic Brake Control Module (EBCM) harness.
- A poor electrical connection in the Electronic Brake Control Module (EBCM) circuit.
Fixing Error Code c1214 Step By Step
Repairing the ABS pump motor circuit will resolve fault code C1214.
- To fix OBDII code C1214, start by reviewing the possible causes mentioned above.
- Visually examine the wiring harness and connectors related to the ABS system.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the ABS module for proper operation and communication.
- Replace the ABS module if necessary.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing c1214 Fault Code
Diagnosing and repairing fault code C1214 typically involves inspecting and servicing the vehicle’s brake switch circuit.
The cost to diagnose and fix OBD code C1214 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1214 OBD Code
C1214 indicates a problem with the ABS pump motor circuit.
OBD code C1214 means Stability Control Inhibit Warning.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects an issue with the stability control system.
The signal or system involved in this code is the stability control system, which helps maintain vehicle stability during cornering or evasive maneuvers by applying individual brakes and reducing engine power as needed.
Mechanic’s Tech Notes
Code C1214 indicates a malfunction in the steering angle sensor circuit.
OBDII code C1214 indicates a malfunction in the Electronic Brake Control Module (EBCM) relay circuit.
To diagnose, use a voltmeter to check power and ground connections to the EBCM.
Scan tools can help verify communication over the Controller Area Network (CAN) network.
Inspect wiring harnesses and connectors for damage, and check connector pins for corrosion or other issues.
Reflashing the EBCM may be necessary to resolve the fault.
FAQ
OBD code C1214 indicates an issue with the Electronic Brake Control Module (EBCM). Check for wiring harness faults and connector issues. Inspect for damage or corrosion.
Common symptoms of OBD code C1214 include ABS warning light and engine light on. Causes may be faulty EBCM or related wiring issues. Inspect and repair as needed.
Diagnose and repair OBD code C1214 by checking EBCM for faults. Inspect wiring harness, connectors, and pins for damage or corrosion.
Wrap Up
If your ABS warning light is on and you’re seeing OBDII code c1214, it may indicate a malfunction in the ABS hydraulic pump motor circuit.
This could be caused by a faulty ABS pump motor, damaged wiring, or poor electrical connections.
To address OBDII code c1214, check the wiring harness for any signs of damage or corrosion.
Test the connectors for proper connection and continuity.
If no issues are found, consider replacing the ABS pump motor to resolve the problem.
