The OBD code C1155 indicates a fault in the Left Front Wheel Speed Sensor circuit of the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This is commonly caused by a faulty sensor, open/shorted harness, or poor electrical connection.
It is a moderate issue that can affect braking performance.
To fix, inspect and repair the sensor, harness, and connections as needed.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1155 OBD Code
The vehicle displays an illuminated ABS warning light on the dashboard.
- Symptoms for OBD code C1155 may include: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Unusual noises coming from the ABS system.
- Braking performance may feel different than usual.
Causes of the c1155 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues related to fault code C1155 include faulty wheel speed sensor or damaged wiring.
- C1155 can be caused by a Faulty Left Front Wheel Speed Sensor.
- A Left Front Wheel Speed Sensor harness that is open or shorted.
- A Left Front Wheel Speed Sensor circuit with poor electrical connection.
Fixing Error Code c1155 Step By Step
Resolve fault code C1155 by inspecting and repairing the wheel speed sensor circuit on the vehicle.
- To fix OBDII code C1155, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensor for proper operation and connection.
- Test the sensor’s resistance and signal output.
- If the sensor is faulty, replace it with a new one.
- Clear the fault codes using a scan tool and test drive the vehicle to verify the repair.
- If the issue persists, further diagnosis of the ABS module or related components may be necessary.
Cost Of Fixing c1155 Fault Code
Diagnosing and repairing fault code C1155 may involve inspecting and replacing faulty wheel speed sensors.
The cost to diagnose and fix OBD code C1155 depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour, so the general cost could be between $75 and $150. Factors like shop rates and the complexity of the repair can influence the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1155 OBD Code
C1155 pertains to a fault in the vehicle’s front wheel speed sensor circuit.
OBD code C1155 means Speed Wheel Sensor RF Input Circuit Failure.
This code is triggered by the ABS module when it detects a circuit malfunction in the right front wheel speed sensor.
The ABS module monitors the speed of each wheel using sensors to ensure proper operation of the ABS system and traction control.
When a fault is detected in the circuit of the right front wheel speed sensor, the C1155 trouble code is set.
Mechanic’s Tech Notes
Code C1155 indicates a fault in the front wheel speed sensor circuit.
OBDII code C1155 typically indicates a fault with the steering angle sensor.
To diagnose, use a scan tool to check for any related trouble codes and to monitor sensor data.
Visually inspect the wiring harness and connectors for any damage or corrosion.
Test the sensor’s power and ground using a voltmeter.
Ensure the sensor is properly calibrated and that there are no mechanical issues affecting its operation.
If necessary, recalibrate or replace the sensor.
Remember to clear the codes after any repairs are made.
FAQ
OBD code C1155 indicates an issue with the Left Front Wheel Speed Sensor in the AntiLock Brake System. Check sensor, harness, and connections for faults.
Common symptoms for OBD code C1155 include ABS warning light on, engine light on, caused by faulty left front wheel speed sensor or related wiring issues. Fix: Inspect and repair sensor and wiring.
Diagnose and repair OBD code C1155 by checking the left front wheel speed sensor, its harness, and connections for faults. Inspect for damage or poor connections.
Wrap Up
If your ABS warning light is on and you see OBDII code C1155, it may indicate a fault in the left rear wheel speed sensor circuit.
This could be caused by a damaged sensor, faulty wiring, or poor connections.
To address OBDII code C1155, start by inspecting the wiring leading to the left rear wheel speed sensor for any signs of damage or corrosion.
Check the sensor itself for proper operation and connection.
Replace any faulty components and ensure all connections are secure to resolve the issue.
