The OBD code C107D indicates an issue with the Brake Pedal Switch circuit in the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This is commonly caused by a faulty Brake Pedal Switch or related wiring issues.
It is important to visually inspect the wiring harness and connectors for any damage or poor connections to resolve this issue.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c107d OBD Code
The vehicle displays a warning light indicating a communication error with the body control module.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
- Unusual noises coming from the ABS system.
Causes of the c107d OBD Code
Possible triggers for fault code c107d include issues with the steering angle sensor or related wiring.
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
- C107D can be caused by a faulty Brake Pedal Switch.
- A Brake Pedal Switch harness that is open or shorted.
- A Brake Pedal Switch circuit with a poor electrical connection.
Fixing Error Code c107d Step By Step
To address fault code C107D, inspect and repair the communication circuit for the park assist module.
- To fix OBDII code C107D, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the power and ground connections to the module associated with the code.
- Perform a module reset or reprogramming if necessary.
- Consider replacing the module if all other steps do not resolve the issue.
Cost Of Fixing c107d Fault Code
Diagnosing and repairing fault code c107d may require inspection of the ABS module and related components.
The cost to diagnose and fix OBD code C107D depends on the estimated 1. 0hour repair time.
Labor rates range from $75 to $150 per hour, so the general cost could be between $75 and $150. Factors like shop rates and complexity can influence the final cost.
Details of the c107d OBD Code
Code C107D indicates a fault with the park brake switch circuit in the vehicle.
OBD code C107D indicates a fault with the park brake switch circuit.
This code is triggered by the body control module (BCM) when it detects an issue with the park brake switch circuit.
The park brake switch is part of the parking brake system and is used to inform the BCM when the parking brake is engaged or disengaged.
When the BCM detects a fault with this circuit, it will set code C107D and illuminate the warning light on the dashboard to alert the driver of the issue.
Mechanic’s Tech Notes
This fault code indicates an issue with the park brake control module.
OBDII code C107D typically indicates a problem with the Transmission Control Module (TCM) power supply.
To diagnose this, use a multimeter to check the TCM’s power and ground connections for proper voltage levels.
Additionally, utilize a scan tool to confirm if the TCM is communicating over the Controller Area Network (CAN) network.
If the TCM is unresponsive, reprogramming or reflashing it may be necessary.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint the root cause of the issue for an effective repair.
FAQ
OBD code C107D indicates an issue with the Brake Pedal Switch circuit. Check for faults in the switch, harness, or connections for ABS and Engine warning lights.
Common symptoms for OBD code C107D include ABS warning light on, engine light on, caused by faulty brake pedal switch or related wiring issues. Fix: Inspect and repair wiring connections.
Diagnose OBD code C107D by checking the brake pedal switch and its wiring for faults. Inspect for damage or poor connections. Repair as needed.
Wrap Up
If your vehicle displays OBDII code c107d, you may experience issues with the brake pedal position sensor circuit.
This could be caused by a faulty brake pedal position sensor, damaged wiring, or poor electrical connections in the circuit.
To address OBDII code c107d, start by inspecting the brake pedal position sensor and its wiring harness for any signs of damage or corrosion.
Test the sensor’s functionality and ensure all electrical connections are secure.
Replace the sensor if necessary and repair any damaged wiring to resolve the issue.
