OBD code C1032 indicates a problem with the Right Rear Wheel Speed Sensor circuit in the AntiLock Brake System (ABS).
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This can be caused by tire air pressure mismatch, a faulty sensor, or wiring issues.
It’s a moderate issue that should be addressed promptly.
To fix it, inspect and repair any damaged components or wiring connections related to the Right Rear Wheel Speed Sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c1032 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C1032 stored.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
- Unusual noises coming from the ABS system.
Causes of the c1032 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1032 include issues with the ABS control module or wheel speed sensors.
- C1032 can be caused by tire air pressure mismatch.
- A faulty Right Rear Wheel Speed Sensor.
- The Right Rear Wheel Speed Sensor harness is open or shorted.
- A poor electrical connection in the Right Rear Wheel Speed Sensor circuit.
- A faulty AntiLock Brake System (ABS) Module.
Fixing Error Code c1032 Step By Step
To resolve fault code C1032, inspect and repair the steering angle sensor circuit as needed.
- To fix OBDII code C1032, first, review the possible causes mentioned above.
- Visually examine the corresponding wiring harness and connectors for any issues.
- Check for damaged components and inspect the connector pins for signs of damage.
- Ensure no wires are broken, bent, pushed out, or corroded.
- If the wiring and connectors are in good condition, consider checking the wheel speed sensors and the ABS module for faults.
- Replace any faulty components as needed.
- Finally, clear the fault code with a scan tool and test drive the vehicle to verify the repair.
Cost Of Fixing c1032 Fault Code
Diagnosing and repairing fault code C1032 may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code C1032 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
Details of the c1032 OBD Code
Code C1032 indicates a fault in the right front wheel speed sensor circuit.
OBD code C1032 means Left Rear Wheel Speed Sensor Input Signal Missing.
This code is triggered by the ABS module when it does not receive a signal from the left rear wheel speed sensor.
The ABS module uses this signal to monitor the speed of the left rear wheel for proper ABS operation.
If the signal is missing, it can affect the ABS system’s ability to function correctly, potentially leading to unsafe driving conditions.
Mechanic’s Tech Notes
Code C1032 indicates a fault in the right front wheel speed sensor circuit.
OBDII code C1032 typically indicates a communication issue with the transmission control module (TCM).
To diagnose this, start by checking the TCM’s power and ground using a multimeter.
Next, use a scan tool to confirm if the TCM is communicating properly over the Controller Area Network (CAN) network.
If communication issues persist, consider reprogramming or reflashing the TCM.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint the root cause of the communication problem and guide you towards an effective solution.
FAQ
OBD code C1032 indicates a fault with the Right Rear Wheel Speed Sensor circuit. Check for tire pressure mismatch, sensor issues, or ABS module faults.
Common symptoms of OBD code C1032 include ABS warning light on, engine light on, caused by tire pressure mismatch, faulty right rear wheel speed sensor.
Diagnose OBD code C1032 by checking for tire pressure mismatch, faulty right rear wheel speed sensor, or ABS module issues. Inspect wiring and connectors for damage.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c1032, it may indicate a fault with the right front wheel speed sensor circuit.
This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a problem within the ABS module.
To address OBDII code c1032, start by inspecting the wiring harness and connectors related to the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary.
