[SOLVED] C102D Code: Quick Fix For Power Steering Friction

OBD code C102D indicates a fault in the Steering Gear Module.

Symptoms include the ABS and Engine warning lights being illuminated.

The issue is typically caused by a faulty steering gear.

It is a moderate concern that should be addressed promptly.

To fix it, inspect the wiring harness, connectors, and components for any damage or corrosion.

Pay close attention to the connector pins for any signs of damage.

Repair Importance Level10.0 (Out of 10)
Estimated Repair TimeApproximately 1.0 hour
Repair Difficulty Level10.0 (Out of 10)

The vehicle displays a warning light indicating a fault with the steering angle sensor.

  • Symptoms: AntiLock Brake System (ABS) Warning Light ON.
  • Engine Light ON (or Service Engine Soon Warning Light).
  • Possible loss of ABS functionality.
  • Brake pedal may feel different than usual.
  • Unusual noises coming from the ABS system.

Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)

Possible triggers for fault code C102D include issues with the steering angle sensor or related components.

  • C102D can be caused by a faulty steering gear

To resolve fault code C102D, inspect and repair the wheel speed sensor circuit as needed.

  • To fix OBDII code C102D, first, review the possible causes related to this code.
  • Visually examine the wiring harness and connectors associated with the ABS system.
  • Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
  • Test the ABS module for proper operation and communication.
  • Replace the ABS module if necessary.
  • Clear the fault codes and perform a road test to ensure the issue has been resolved.

The repair for fault code C102D may involve replacing the steering angle sensor.

The cost to diagnose and fix OBD code C102D depends on the estimated 1. 0hour repair time.

Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Actual cost may vary based on shop rates and the complexity of the repair.

That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.

Code C102D relates to a fault in the steering angle sensor module.

OBD code C102D indicates an issue with the transmission fluid pressure sensor.

This code is triggered by the Transmission Control Module (TCM) when it detects a signal from the transmission fluid pressure sensor that is outside of the expected range.

The sensor is responsible for monitoring the hydraulic pressure within the transmission to ensure proper operation.

When the sensor sends a signal that is not within the specified parameters, the TCM will set a trouble code C102D to indicate a problem with the transmission fluid pressure sensor.

Code C102D indicates a fault with the left rear wheel speed sensor circuit.

OBDII code C102D typically indicates a problem with the transmission control module (TCM).

To diagnose this, you can check the TCM’s power and ground using a multimeter.

Additionally, use a scan tool to confirm if the TCM communicates properly over the Controller Area Network (CAN) network.

If the TCM does not respond, reprogramming or reflashing it may be necessary.

Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.

This thorough inspection can help pinpoint the issue and guide you towards an effective repair.

1. What does OBD code C102D indicate in a vehicle?

OBD code C102D indicates a fault in the steering gear. Symptoms include ABS and Engine warning lights. Check wiring harness, connectors, and components for damage.

2. What are the common symptoms associated with OBD code C102D?

Common symptoms for OBD code C102D include ABS warning light on, engine light on. Possible causes are faulty steering gear. Fix: Inspect wiring harness, connectors for damage.

3. How can I diagnose and repair OBD code C102D in my vehicle?

Diagnose OBD code C102D by checking for a faulty steering gear. Inspect wiring harness, connectors, and pins for damage or corrosion.

 c102d error fault code explained

If your vehicle displays OBD code c102d, you may experience issues with the transmission range sensor circuit.

This could be caused by a faulty transmission range sensor, damaged wiring, or poor electrical connections.

To address OBD code c102d, start by inspecting the wiring harness and connectors related to the transmission range sensor.

Look for any signs of damage, corrosion, or loose connections.

Test the transmission range sensor for proper operation and replace it if necessary to resolve the circuit issue.

Scroll to Top