OBD code C1008 indicates an issue with the Brake Fluid Level Sensor circuit.
Symptoms include the ABS Warning Light and Engine Light being illuminated.
This code is commonly caused by a faulty sensor, open/shorted sensor harness, or poor electrical connection.
It is a moderate issue that should be addressed promptly.
To fix it, inspect the sensor, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c1008 OBD Code
The vehicle displays an ABS warning light on the dashboard with fault code C1008 stored.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Brake pedal may feel different during braking.
Causes of the c1008 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C1008 include issues with the ABS pump motor circuit.
- C1008 can be caused by a faulty Brake Fluid Level Sensor.
- A Brake Fluid Level Sensor harness that is open or shorted.
- A Brake Fluid Level Sensor circuit with a poor electrical connection.
Fixing Error Code c1008 Step By Step
To resolve fault code C1008, inspect and repair the ABS pump motor circuit as needed.
- To fix OBDII code C1008, first, review the possible causes mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the wheel speed sensor wiring and connections for any issues.
- Test the wheel speed sensors for proper operation using a multimeter.
- Replace any faulty wheel speed sensors as needed.
- Clear the fault codes using a scan tool and test drive the vehicle to verify that the issue has been resolved.
Cost Of Fixing c1008 Fault Code
The repair for fault code C1008 typically involves replacing the right front ABS sensor.
The cost to diagnose and fix OBD code C1008 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the total cost could be between $75 and $150. Factors like shop rates and complexity of the issue can affect the final cost.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c1008 OBD Code
Code C1008 indicates an issue with the ABS pump motor circuit.
OBD code C1008 indicates an issue with the right front wheel speed sensor circuit.
This code is triggered by the AntiLock Brake System (ABS) module when it detects a problem with the signal coming from the right front wheel speed sensor.
The ABS module uses this sensor to monitor the speed of the right front wheel to help prevent wheel lockup during braking.
If the sensor or its circuit has a fault, the ABS module will set a C1008 fault code.
Mechanic’s Tech Notes
Code C1008 relates to an issue with the ABS pump motor circuit.
OBDII code C1008 typically indicates a fault with the Transmission Control Module (TCM) power circuit.
To diagnose, use a voltmeter to check TCM power and ground connections for proper voltage levels.
Utilize a scan tool to confirm TCM communication over the Controller Area Network (CAN) bus.
Visually inspect wiring harnesses and connectors for any damage, and ensure connector pins are intact and free of corrosion.
If all checks out, consider reprogramming the TCM.
FAQ
OBD code C1008 indicates an issue with the Brake Fluid Level Sensor circuit. Check sensor, wiring, and connectors for faults to resolve ABS and Engine warning lights.
Common symptoms for OBD code C1008 include ABS warning light and engine light on. Causes may be faulty brake fluid level sensor or related wiring issues. Fix: Inspect sensor and wiring.
Diagnose OBD code C1008 by checking the brake fluid level sensor and its wiring for faults. Inspect connectors for damage or corrosion. Fix as needed.
Wrap Up
If your ABS warning light is on and you see OBDII code c1008, it may indicate a fault in the right front wheel speed sensor circuit.
This could be caused by a damaged wheel speed sensor, faulty wiring connections, or a problem with the ABS module.
To address OBDII code c1008, start by inspecting the wiring harness and connectors leading to the right front wheel speed sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary.
