OBD code C0750 indicates an issue with the Left Front Low Tire Pressure Sensor in the Tire Pressure Monitor System (TPMS).
Symptoms include the TPMS warning light and engine light being illuminated.
The problem is often caused by sensor learn procedure not being performed, a faulty sensor, or wiring issues.
This is a moderate issue that should be addressed promptly.
To fix it, inspect and repair any damaged wiring or connectors related to the left front tire pressure sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0750 OBD Code
The vehicle displays an ABS warning light on the dashboard.
- Symptoms: Tire Pressure Monitor System (TPMS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible issues with the tire pressure monitoring system.
Causes of the c0750 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible reasons for fault code C0750 include issues with the rear axle control circuit.
- C0750 can be caused by a faulty Left Front Low Tire Pressure Sensor.
- A Left Front Low Tire Pressure Sensor harness that is open or shorted.
- A poor electrical connection in the Left Front Low Tire Pressure Sensor circuit.
- It can also be caused by a malfunctioning Tire Pressure Indicator Sensor Learn procedure.
Fixing Error Code c0750 Step By Step
Repair involves inspecting and repairing the steering angle sensor circuit for fault code C0750.
- To fix OBDII code C0750, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Test the wiring for continuity and repair any faults found.
- If the wiring checks out, proceed to inspect the transfer case shift control module for any signs of damage or corrosion.
- Replace the transfer case shift control module if necessary.
- Clear the fault codes from the vehicle’s computer using a scan tool and test drive the vehicle to ensure the issue has been resolved.
Cost Of Fixing c0750 Fault Code
Diagnosing and repairing fault code C0750 may involve inspecting and possibly replacing the steering angle sensor.
The cost to diagnose and fix OBD code C0750 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, so the general cost could be between $75 and $150. The final cost may vary based on shop rates and the complexity of the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0750 OBD Code
Code C0750 indicates an issue with the rear wheel speed sensor circuit.
OBD code C0750 indicates an issue with the Park Brake Control Module Performance.
This code is triggered by the Powertrain Control Module (PCM) when it detects a performance problem with the park brake control module.
The park brake control module is responsible for controlling the operation of the electronic parking brake system in the vehicle.
When this code is set, it typically points to a fault within the park brake control module itself or a communication issue between the module and the PCM.
Mechanic’s Tech Notes
Code C0750 indicates an issue with the rear axle control circuit in the vehicle’s ABS system.
OBDII code C0750 indicates a fault with the Transfer Case Control Module (TCCM) motor circuit.
To diagnose, use a voltmeter to check power and ground connections to the TCCM.
Utilize a scan tool to confirm TCCM communication over the Controller Area Network (CAN) network.
Visually inspect wiring harnesses and connectors for damage, focusing on pin condition for signs of corrosion or damage.
Reflashing the TCCM may be necessary to resolve the issue.
FAQ
OBD code C0750 indicates an issue with the Left Front Low Tire Pressure Sensor circuit. Check sensor, wiring, and connectors for faults.
Common symptoms for OBD code C0750 include TPMS warning light ON, Engine Light ON, caused by faulty left front low tire pressure sensor. Fix: Inspect sensor and wiring for issues.
Diagnose OBD code C0750 by checking left front tire pressure sensor and harness. Repair by inspecting wiring for damage or poor connection.
Wrap Up
If your ABS warning light is illuminated and you’re experiencing issues with the vehicle’s braking system, along with OBDII code C0750, it may indicate a problem with the rear wheel speed sensor circuit.
This could be caused by a faulty wheel speed sensor, damaged wiring harness, or poor electrical connection at the sensor.
To address OBDII code C0750, start by inspecting the wiring leading to the rear wheel speed sensor for any signs of damage or corrosion.
Test the sensor’s resistance and check for proper voltage supply.
Replace the sensor if necessary and ensure all connections are secure to
