The OBD code C0710 indicates an issue with the Steering Wheel Angle Sensor Centering (Calibration) in the Electronic Brake Control Module (EBCM).
Symptoms include the ABS Warning Light and Engine Light being ON.
This can be caused by a faulty sensor, wiring harness issues, or poor electrical connections.
It is a moderate issue that should be addressed promptly.
To fix it, inspect and repair any damaged components, wiring harness, or connectors related to the steering wheel angle sensor.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0710 OBD Code
The vehicle displays a warning light indicating an issue with the Electronic Brake Control Module (EBCM).
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of ABS functionality.
- Strange noises from the ABS system.
- Brake pedal may feel different than usual.
Causes of the c0710 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible triggers for fault code C0710 include issues with the steering angle sensor or its circuit.
- C0710 can be caused by Steering Wheel Angle Sensor Centering (Calibration).
- A Faulty Steering Wheel Angle Sensor.
- An open or shorted Steering Wheel Angle Sensor harness.
- A poor electrical connection in the Steering Wheel Angle Sensor circuit.
- Or a Faulty Electronic Brake Control Module (EBCM).
Fixing Error Code c0710 Step By Step
Resolve fault code C0710 by inspecting the steering angle sensor and related wiring for faults.
- To fix OBDII code C0710, first, review the possible causes related to this code.
- Visually examine the wiring harness and connectors associated with the steering angle sensor.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- If no visible issues are found, perform a reset of the steering angle sensor module.
- Test the sensor’s operation by turning the steering wheel lock to lock.
- If the problem persists, consider replacing the steering angle sensor and recalibrating it using a scan tool.
Cost Of Fixing c0710 Fault Code
Diagnosing and repairing fault code C0710 may involve inspecting and servicing the steering angle sensor system.
The cost to diagnose and fix OBD code C0710 is influenced by the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour, affecting the total cost.
Other factors like shop rates and the complexity of the repair can also impact the final price.
Details of the c0710 OBD Code
C0710 indicates an issue with the steering angle sensor circuit in the vehicle’s electronic stability control system.
OBD code C0710 means Steering Position Signal.
This code is triggered when the Electronic Brake Control Module (EBCM) detects an invalid or erratic signal from the steering position sensor.
The steering position sensor is responsible for providing information about the steering wheel angle and rate of rotation to the EBCM.
When the EBCM receives an inconsistent or incorrect signal from the steering position sensor, it sets code C0710 to indicate a problem with the steering position signal.
Mechanic’s Tech Notes
Code C0710 indicates an issue with the steering position sensor circuit.
OBDII code C0710 indicates a problem with the Electronic Brake Control Module (EBCM).
To diagnose, check the power and ground to the EBCM using a voltmeter.
Use a scan tool to confirm communication over the Controller Area Network (CAN) network.
Inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, or corroded.
Reflashing the module may be necessary.
This process helps identify electrical issues affecting the EBCM, allowing for a targeted repair approach.
FAQ
OBD code C0710 indicates an issue with the Steering Wheel Angle Sensor, causing ABS and Engine warning lights. Check sensor, wiring, and connections for faults.
Common symptoms of OBD code C0710 include ABS warning light on, engine light on, caused by steering wheel angle sensor issues. Fix involves inspecting wiring and connectors.
Diagnose OBD code C0710 by checking steering wheel angle sensor calibration, sensor condition, and wiring. Repair by inspecting and repairing any damaged components or connectors.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c0710, it may indicate a problem with the steering angle sensor circuit.
This could be caused by a faulty steering angle sensor, damaged wiring, or poor connections in the system.
To address OBDII code c0710, start by inspecting the wiring harness and connectors related to the steering angle sensor.
Look for any signs of damage, corrosion, or loose connections.
Test the sensor itself for proper operation and replace if necessary to resolve the issue.
