OBD code C0590 indicates a fault with the Right Rear Shock Absorber Actuator circuit in the Suspension Control Module.
Symptoms include the Engine Light being ON.
The issue is commonly caused by a faulty actuator or wiring harness issues.
It is important to address promptly to prevent further suspension problems.
A possible fix involves inspecting and repairing the actuator, wiring harness, and connectors for any damage or poor connections.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
Symptoms of the c0590 OBD Code
The vehicle displays a warning light indicating a fault with the steering angle sensor.
- Symptoms: Service Stability Control warning light may illuminate.
- Loss of stability control system functionality.
- Possible ABS system issues.
- Brake pedal may feel different during braking.
Causes of the c0590 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues related to fault code C0590 include faulty steering angle sensor or wiring problems.
- C0590 can be caused by a faulty Right Rear Shock Absorber Actuator.
- A Right Rear Shock Absorber Actuator harness that is open or shorted.
- A Right Rear Shock Absorber Actuator circuit with a poor electrical connection.
- A faulty Suspension Control Module.
Fixing Error Code c0590 Step By Step
To address fault code C0590, inspect the steering angle sensor for proper operation and calibration.
- To fix OBDII code C0590, first, review the ‘Possible Causes’ mentioned above and visually examine the corresponding wiring harness and connectors.
- Ensure to check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, check the power and ground connections to the affected module.
- Test the module for proper operation and communication.
- If necessary, reprogram or replace the module following manufacturer guidelines.
- Clear the fault codes and perform a road test to verify the repair.
Cost Of Fixing c0590 Fault Code
Diagnosing and repairing fault code C0590 may involve inspecting and replacing the steering angle sensor.
The cost to diagnose and fix OBD code C0590 is typically based on 1. 0 hour of labor, with rates ranging from $75 to $150 per hour.
The total cost will depend on shop rates, complexity of the issue, and any parts needed for the repair.
That fault code is a turning point. If repair costs are climbing and your current loan feels like it’s holding you back, this is the time to plan ahead. The free Car Loan Payment Tracker helps you see how quickly you can pay off what’s left—and start preparing, with confidence, for your dream car.
Details of the c0590 OBD Code
Code C0590 indicates a problem with the active grille air shutter A control circuit.
OBD code C0590 indicates a problem with the active grille air shutter A control circuit.
This code is triggered by the body control module (BCM) when it detects a malfunction in the circuit responsible for controlling the active grille air shutter.
The active grille air shutter helps regulate airflow to the engine for improved efficiency and performance.
When this circuit malfunctions, it can affect the operation of the active grille air shutter system, potentially leading to issues with engine cooling, aerodynamics, and fuel efficiency.
Mechanic’s Tech Notes
Code C0590 indicates a problem with the active grille air shutter control circuit.
OBDII code C0590 indicates a problem with the transmission control module (TCM) power circuit.
To diagnose this, use a multimeter to check TCM power and ground connections for proper voltage and continuity.
Additionally, use a scan tool to communicate with the TCM over the Controller Area Network (CAN) to verify its responsiveness.
Visually inspect the wiring harness and connectors for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
If all connections and wiring look good, consider reprogramming or reflashing the TCM as a potential fix.
FAQ
OBD code C0590 indicates an issue with the Right Rear Shock Absorber Actuator. Check wiring harness, connectors, and components for faults.
Common symptoms of OBD code C0590 include Engine Light ON, caused by issues like faulty Right Rear Shock Absorber Actuator or related wiring problems. Inspect and repair as needed.
Diagnose OBD code C0590 by checking the right rear shock absorber actuator, harness, and connections for faults. Repair as needed to resolve the issue.
Wrap Up
If your ABS warning light is illuminated and you retrieve OBDII code c0590, it may indicate a fault in the electronic brake control module (EBCM) motor circuit.
This could be caused by a malfunctioning EBCM motor, damaged wiring, or poor connections within the system.
To address OBDII code c0590, start by inspecting the wiring harness and connectors related to the EBCM motor.
Look for any signs of damage, corrosion, or loose connections.
Test the EBCM motor for proper operation and replace if necessary to resolve the issue.
