OBD code C0561 indicates a problem with the Electronic Brake Control Module (EBCM).
Symptoms include the ABS warning light and engine light being illuminated.
The issue is not with the EBCM itself, so other codes should be checked.
To fix, inspect the wiring harness, connectors, and components for damage or corrosion.
This issue should be addressed promptly to ensure safe braking operation.
| Repair Importance Level | 10.0 (Out of 10) |
| Estimated Repair Time | Approximately 1.0 hour |
| Repair Difficulty Level | 10.0 (Out of 10) |
I know how frustrating it is to see that warning light pop up again and again. You don’t need to spend money at the mechanic just to clear it. With this pocket-friendly automatic car scanner, you can do it yourself in seconds and and avoid the time and inconvenience of driving to a mechanic. Just plug it in, connect to your Android or iOS phone, and instantly see live data. Understand the fault code, clear it right away, and decide if it’s something urgent or if you’re good to drive. It even monitors your car and sends notifications to your phone, so you’re always in control. Simple, fast, and stress-free—today’s offer price!
Symptoms of the c0561 OBD Code
The vehicle may experience traction control issues with fault code C0561 stored in the system.
- Symptoms: AntiLock Brake System (ABS) Warning Light ON.
- Engine Light ON (or Service Engine Soon Warning Light).
- Possible loss of traction control functionality.
- Braking performance may be affected.
- Unusual noises from the ABS system.
Causes of the c0561 OBD Code
Do you know you can clear most fault codes—but some could mean serious danger? Don’t take chances with your safety or your family’s safety. This budget-friendly car scanner makes it easy to clear fault codes in seconds while showing you exactly what’s wrong. Plug it in, connect to your Android or iOS phone, and instantly check live data. You’ll know if it’s a minor issue you can clear or something serious that needs attention—so you can drive safely and stress-free. (Today’s Deal)
Possible issues with the Electronic Brake Control Module can trigger fault code C0561.
- C0561 can be caused by faulty wheel speed sensors.
- Broken wiring connectors.
- Low voltage in the system.
- Corroded ground connections.
- Signal loss between the EBCM and other modules.
- Causes: There are no problems with the Electronic Brake Control Module (EBCM), check other codes.
Fixing Error Code c0561 Step By Step
Address the issue by diagnosing and repairing the Electronic Stability Control (ESC) system as needed.
- To fix OBDII code C0561, start by reviewing the possible causes mentioned above and visually examining the corresponding wiring harness and connectors.
- Check for any damaged components and inspect the connector pins for signs of being broken, bent, pushed out, or corroded.
- Next, perform a thorough inspection of the Electronic Brake Control Module (EBCM) and ensure it is functioning correctly.
- If no issues are found with the wiring or EBCM, consider reprogramming the module to address any softwarerelated issues.
- If the problem persists after reprogramming, replacing the EBCM may be necessary to resolve the C0561 fault code.
Cost Of Fixing c0561 Fault Code
The repair for fault code C0561 typically involves diagnosing and fixing issues with the Electronic Brake Control Module.
The cost to diagnose and fix OBD code C0561 depends on the estimated 1. 0hour repair time.
Labor rates usually range from $75 to $150 per hour.
The total cost will vary based on shop rates, complexity of the issue, and any additional parts or services needed.
Details of the c0561 OBD Code
C0561 indicates a problem with the traction control system in the vehicle.
OBD code C0561 means System Disabled Information Stored.
This code is triggered by the Electronic Brake Control Module (EBCM) when it detects an issue with the traction control system.
The signal or system involved in this code is related to the traction control system, which may be disabled due to a fault detected by the EBCM.
Mechanic’s Tech Notes
Code C0561 typically indicates a problem with the Electronic Stability Control system in the vehicle.
OBDII code C0561 typically indicates a problem with the traction control system.
To diagnose this, you can start by checking the power and ground to the Transmission Control Module (TCM) using a multimeter.
Next, use a scan tool to confirm if the TCM is communicating properly over the Controller Area Network (CAN) network.
If there are issues with communication, reprogramming or reflashing the TCM may be necessary.
Additionally, inspect the wiring harness and connectors related to the TCM for any damage, and ensure connector pins are not broken, bent, pushed out, or corroded.
This thorough inspection can help pinpoint the root cause of the C0561 trouble code.
FAQ
Common symptoms for OBD code C0561 include ABS warning light and engine light on. Check EBCM, review possible causes, and inspect wiring harness and connectors for damage.
Possible causes of OBD code C0561 include issues with wheel speed sensors, ABS module, wiring harness, connectors, or other related components. Visual inspection and checking for damaged parts are crucial.
Diagnose OBD code C0561 by checking for other codes, inspecting wiring harness/connectors for damage, and examining connector pins for issues.
Wrap Up
If your ABS warning light is on and you see OBDII code c0561, it may indicate a problem with the Electronic Brake Control Module (EBCM) software calibration.
This could be caused by a software issue, a faulty wheel speed sensor, or a wiring problem in the ABS system.
To address OBDII code c0561, consider reprogramming the EBCM with the latest software update.
Additionally, inspect the wiring harness and connectors for any damage or corrosion that may be affecting the ABS system’s operation.
